• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Choosing uPVC Replacement Window Handles

Nearly all customers agree that these upvc replacement window handles are easy to fit and feel as good quality. However, it is important to realize that the type of handle you select must be right for your window.

The height of the step is the most important aspect. It is the distance between the handle and the frame or base. Other factors to consider are lockable styles and mechanisms.

Replacement parts

You can purchase a variety of replacement handles made of upvc. There are many styles and colours to choose from, so you're sure to find one that will match your existing windows. It's easy to buy on impulse especially if the handle is damaged, therefore it's a good idea to look over the details prior to committing to buying a new one. The first thing to consider is the kind of upvc handle do you have now and what the difference between kinds is. The table below shows the most commonly used handles to help you identify the one that is suitable for your windows made of upvc.

Most double-glazed windows today have handles that are epag. They are typically attached to the frame using two screws that screw into the frame from both sides, above and below.

They come with a spindle bar on the back, which can come in a variety of sizes, and this will determine how they work (either left or right handed). It is important to determine the measurements of the handle you currently must ensure that you get the correct replacement.

The arm is secured to the frame by two bolts, much like the Espag handle. However, the handle is curved at a low angle so that it doesn't damage your blinds. This is a great choice if you want the handle to blend with your blinds and windows made of upvc.

Cockspur handles are similar to Espag handles, but they have a nose which closes over a wedge, which is placed on the frame of the window. This type handle is found on older wooden and upvc windows.

Tilt and turn handles are typically found on casement windows and can be operated by turning the handle or pressing on the top of the window. The window is opened from the inside and lets you to clean outside without having to go out onto a ladder or step over the garden fence. These are also a great option for those with mobility issues, and can enhance security and access to the home.

Tips and tricks

There are a number of different types of uPVC window handles, and many people will have to replace them at some moment. If this happens, it's a good idea to know a few tips and tricks that will help the job go as smoothly as possible.

Examine the type of handle that is at your home. Depending on the type of handle is connected to and the locking mechanism it is using, it may be necessary to change the entire handle and lock. For example, if the shoot bolts (espag) and roller cams are jammed or seizing, you will need to replace them as well as the handle itself.

Thankfully, the majority of uPVC handles conform to industry standards and are very similar. This makes replacing them an simple task. The first step is to remove the screws from the handles, usually the pozi-drive screws. Once the screw covers are removed, you will be able to remove the handle.

It's a great idea note how much the spindle sticks out from the base of your handle when you separate it. This will enable you to measure the length of the spindle to determine an alternative handle. Simply take note of the length the peg is sticking from the bottom of the handle.

This is especially true for inline uPVC handles for windows, since they are always straight and only open to the left or right. They won't work in the middle. It's a good idea if you're not certain of the type of handle you have at your home to borrow a handle to see how it functions.

You can also determine the handiness of a uPVC window by watching how the handle spins when it is in use. Handles that are hand-operated will turn clockwise or counter-clockwise. If you're not sure then ask someone to open the window with the handle and see what happens.

Find the spindle's measurement.

It isn't easy to select the right replacement handle for your window because there aren't all handles that come in the same size. It is crucial to accurately measure the spindle when fitting a new handle. This will ensure that the handle fits. There are many different kinds of uPVC window handles and they operate in different ways so it is vital to know the type of handle you have as well as the type of locking system.

Espag handles come with a spindle that extends from the rear of the handle and then into the lock gearbox that is within the window frame. When you turn the handle, this turns the lock within the gearbox, and opens the window. They are installed on uPVC windows with casement and can be locked with keys for extra security.

Cockspur handles are commonly found in older double-glazed uPVC window frames. They have a "nose", which closes over a wedge shaped striker block. They are also quite easy to install and can be locked using keys. It can be more difficult to replace these handles because they are less common than the handles made of espagnolette.

If you have an open tilt and turn uPVC window, you'll require a particular type of uPVC replacement handle that comes with a different locking mechanism. It can open the window by tilting it, but also rotate it back and forth to fully open it. You will need to ensure that the handle you pick has a spindle length of at least 55mm or it won't be able to reach into the window sash replacement frame.

You can follow the same method to remove and replace this type of uPVC handle, but you must be careful when unscrewing the old one. You may need to open the window a bit wider than usual to ensure that you can reach both screws that are fixing it to the frame. Once you have put in your new uPVC handles and checked that they are in the correct position, you can tighten up the screws and test the lock to ensure it works properly.

Install the new handle

If you have the proper replacement handle, it will be easy to screw it into place. This will require a screwdriver and could be simpler with an electric one. When screwing, it is important not to over tighten the screws as this could cause the handle to crack or warp.

Inserting the spindle is the second important step in installing the new handle. The spindle is a part that runs through the handle to control the locking mechanism in the window. It is crucial that it is fitted correctly, as it will ensure that the window can be closed and opened with confidence.

There are a variety of types of uPVC handles. There are a variety of uPVC window handles.

Espagnolette Handles are handles inline that can be used to open tilt and turn windows.

Cranked Espagnolette Handles - these are similar to the inline handle but feature a curved design that can be useful for windows that are difficult to reach.

Tilt and turn handles - these are used on tilt and turn windows for operating the opening and closing mechanisms.

The majority of uPVC window frames are fitted with these. They are commonly called 'Bay Windows' in the UK.

It can be very frustrating when your uPVC handle breaks. There is no need to change the entire uPVC windows because of a damaged window handle. There are a few basic steps you can follow to repair or replace a broken uPVC handle.

Fixing your broken window handle fast by identifying the model and measuring the spindle. When working with tools and windows it is crucial to prioritize safety. But, this is a relatively easy task. It could mean the difference between having a secure and secure home or having a window that can be easily opened. Bridgewater Glass is the place to go if you're in need of help or want to speak with an expert about replacing your window replacement handle. We have a team that is skilled and knowledgeable to help you with any issue.