• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain, durable and long-lasting. They are not susceptible to rot or rust like aluminum and timber.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will reduce unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, which can make it very dangerous and potentially fatal. You should take the time to make sure that your windows are in good condition.

Single-pane windows are fairly simple to replace and generally fit into old frames very easily. If you have double-paned windows that are held together by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this case it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

If you plan to try to remove the glass panes yourself it is important to wear appropriate safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a drop cloth before you start working on the glass to ensure that any shards fall onto the fabric rather than on the floor, where they could be trampled on and cause further damage.

After the glass has been removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional comes out and repair the window. It also acts as a barrier to prevent any intruders from getting into your home. If the distance between the window and the door is significant, you may want to use a security screen that also has an opening. This will provide the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. However, over time, they may be afflicted by a variety of issues, including sagging. A sagging window can cause problems with light, draughts, and even security. It's important to take action immediately if you notice your uPVC windows are sagging.

To fix a window that is sagging you can try repositioning the hinges. To do this, you'll need to open the window so that you can get to the frame. After that, using a screwdriver, you can take off the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and check for fit. If you're happy with the fit, you can tighten the screws until they remain in position.

If you can't reposition the hinges, you might require replacing the seal. As time passes, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. If this happens, it's essential to replace the seal as fast as you can to ensure that your uPVC windows are waterproof and draught-proof.

UPVC handles can also become loose. This is often caused by screws that have become undone over time, but it could be due to the mechanism of the handle wearing out. Fortunately, it's easy to fix the handle of a window that is loose yourself. First, you'll need to shut the window and then perform a test fitting. The corners of the sash should be aligned with the casing joint. If it doesn't then you can use a screwdriver or a wrench to loosen the handle and then reverse the mechanism back into its original position.

3. Water Leaks

If you awake to wet floors and damp walls every time it rains it's crucial to take action. Windows that leak water do are not just a cause for degrading of the structure of your home but also hinder your efforts to regulate the temperature in your home. The most common cause for leaks in uPVC windows is that the sealant around the frame has been damaged or not present.

This is a fairly simple fix and should be undertaken by any skilled DIYer. Depending on how severe the problem is, the old caulking may have to be removed. It is essential to keep in mind that when it is about uPVC window repairs, do not be tempted to apply too much caulk' as this will only make the area more difficult to clean and can reduce your energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more severe situations, you may have to replace the window.

Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass it is more likely the issue is related to the seal, not the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open with a breeze it could be hinges that are at fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Like any mechanical part hinges are prone to be damaged over time. It is essentially a simple process but it can be easier if you have someone to assist in holding the frame up.

Verify that the upvc window repairs hinges are open and closed in the correct direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window in a particular way or due to inadequate installation at the factory. This issue can be fixed by sending us a photo via our website and we will be happy to give you suggestions.

Regular lubrication of the hinges is also necessary. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also decreases the risk of a window sticking and help prevent corrosion. Ideally, you should do this at least once a year. WD40 or other solvent-based oils should not be used since they can damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by different factors. Firstly the hinges, again because of wear and tear, could become misaligned. This can cause a gap to form where the sash meets the frame. This can be easily repaired by giving them thorough clean, however when they're beyond repair, it could be necessary to get them aligned or replaced. The interlock may also become unbalanced. It is located on the hinge's side and may need to be cleaned. In some cases it might be necessary to replace them.

These seals can wear down or get damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and will lessen the possibility of draughts.

Another method of reducing the amount of draughts is to use a Draught-excluder. These are usually fabric tubes filled with a filler which can be placed over your window sill. These will help to keep cold air out and keep your home warm and cozy!

With a little maintenance and repairs, your upvc windows will continue to provide a great level of insulation and security for your home. It is crucial to keep in mind that all windows will eventually wear out and it could be more cost-effective to replace them instead of fixing them. If you have any problems with your Upvc window it is recommended to speak with a professional as soon as possible.