• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Choosing uPVC Replacement Window Handles

Nearly all customers agree that the upvc replacement window handles are easy to fit and feel like high-quality. It's important to know that the handle you choose for your window must be suitable for the window.

The height of the step is the most important factor. It is the distance between the handle and the frame or base. Other factors to consider are lockable mechanisms and styles.

Replacement parts

There is a broad selection of replacement upvc window handles available for purchase. They are available in a variety of colours and styles so there's sure to be something to suit your existing windows. It's easy to impulse buy especially if the handle breaks so it's best to take your time and check the details prior to committing to purchasing a new one. First, you need to be aware of the kind of upvc handles you own and what the differences between them. The table below lists the most popular handles to help you choose the one that will match your window.

The majority of double-glazed windows come with handles that are epag. They are usually fitted to the frame using two screws that are screwed in from both sides.

They come with a spindle bar on the back which can be of a variety sizes, and this will determine the way they operate (either left or right handed). This is the reason it's crucial to measure the current handle to ensure that you're ordering the correct replacement.

Typically fixed by two bolts much like the Espag handle, they are positioned low from the frame which means that the arm will not penetrate your blinds. This is a good option if you have blinds on your upvc windows and you want to make sure the handle will blend in with the blinds.

Cockspur handles resemble Espag handles, however they have a nose that closes over a wedge which rests on the frame of the window. This kind of handle is available on older wooden and upvc windows.

On casement windows the tilt and turn handles are operated by turning the handle or pressing on the top of window. This opens the window from the inside and lets you to clean the outside without having to go out onto a ladder or walk over the garden fence. They're ideal for those with limited mobility, and can enhance security and access to the home.

Tips and tricks

There are many different kinds of uPVC window handles, and lots of people will need to replace them at some time. It is essential to know some tips and tricks that can aid in the process.

The first step is to determine what kind of handle you have at home. Depending on the kind of handle and the locking mechanism, it could be necessary for you to replace the lock and handle. If the roller cams and shoot bolts (espags) are stuck or are getting stuck, you'll need to replace them along with the handle.

Fortunately, the majority of uPVC handles are very similar and adhere to industry standard sizing, which makes replacing them a easy process. First, you must remove the screws that cover the handles. They are typically pozidrive screws. After these screws are removed, you can then take the handle apart.

When you have the handle split, it's a good idea to make note of how much of the spindle extends from the base of the handle. This will help you determine the length of the spindle for the replacement handle. To do this, simply measure the amount of the square peg sticking out from the base of the handle and use it as a guide.

This is especially true for inline uPVC windows handles, as they are always straight and only open left or right. They will not work in the middle. If you're not sure what kind of handle you have in your home, it could be a good idea to take an existing handle from your neighbour's home and observe the way it works to get an idea.

You can also determine the handedness of a uPVC window by watching the way the handle turns when it is in use. Handed handles can be rotated clockwise or counter-clockwise. If you aren't sure you are, ask someone else to open the window with the handle and observe what happens.

Find the spindle's measurement.

Selecting the right replacement handle for your windows could be a challenge as there aren't all handles that are the same size. It is important to measure the spindle accurately when fitting the new handle. This will ensure that the handle fits. There are several different types of uPVC window handles that work in different ways, so it is vital that you know which kind of handle you have as well as the type of locking system that you are using.

The spindle on the espag handle extends out from the handle's rear and is connected to the lock gearbox in the window frame. When you turn the handle, this will turn the lock inside the gearbox, allowing you to open the window. They are installed on uPVC windows with casement and can be locked using keys to provide additional security.

Cockspur handles feature a "nose" which closes over a wedge-shaped striker block on the frame and they are commonly found on older double-glazed uPVC windows. They are also simple and can be locked using keys. These handles are a little more difficult to find replacements for as they aren't as well-known as the espagnolette handle.

If you own a tilt-and-turn uPVC and you require a replacement handle with a different locking system. The handle will tilt the window and allow it to be turned back and forth to fully open it. You must choose an opening handle that has a spindle that is at least 55mm in order to be able to reach the window frame.

The same procedure can be used to remove and replace the uPVC handle. However, you'll need to take care when you remove it. It might be necessary to open the window wider than usual to reach both screws that attach it to the frame. Once you have put in your new uPVC handles and checked that they are in the proper position, you can tighten up the screws and then check to make sure the lock is working correctly.

Fit the new handle

Once you have the correct handle replacement, it's going to be easy to screw it into place. It will require a screwdriver and an electric one might be more convenient. When screwing the screws in, it is important not to over tighten the screws because this can cause the handle to break or warp.

The other important step when installing the handle is to insert the spindle. The spindle is the part which runs through the handle and operates the locking mechanism of the window. It is vital that it is installed correctly since this will ensure that the window can be opened and closed securely.

There are several different types of uPVC window handles. They include:

Espagnolette Handles - These are handles that are inline and can be used to windows that tilt and turn to open the window.

Cranked Espagnolette Handles - these are similar to the inline handle, but have a curvaceous design that is useful for windows in difficult-to-access locations.

Tilt and turn handles - They are used to operate the opening mechanisms and closing mechanisms on tilt and turn. They also move windows.

They are the most popular and the majority of uPVC windows have these in place. In the UK they are usually known as "Bay Windows".

If your uPVC window handle is broken it can be extremely frustrating. There is no need to change the entire uPVC window because of a broken window handle. There are several easy steps that can be taken to fix and replace a damaged uPVC window handle.

Fixing your broken window replacement window handle fast by identifying the type and measuring the spindle. It is crucial to take your time and prioritise security when working with windows and tools, however, this is a easy task. It can make all the difference between having a secure and safe home or a unsecured open window! If you have any concerns or would like to speak to a specialist about replacing the handle on your window, call Bridgewater glass replacement for window. We have a team that is skilled and knowledgeable to help you with any issues.