• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

It's easy to repair a damaged window handle using the appropriate tools. It is essential to know the type of handle you have and the spindle's size before you purchase the replacement.

Older uPVC windows have handles with cockspurs, which have a spur that protrudes to the lock of a wedge cockspur striker plate. These can be left- or right-handed, and must match when replaced.

What type of lock and handle do I need?

There are a variety of upvc window handles and locks, each having their particular advantages and uses. The type of handle that you choose will determine whether or not the locking mechanism you have is effective and if it is easy to open the windows. Over time and through regular use, window handles made of upvc may become damaged or worn out, rendering them less secure and effective. In some cases they could even be completely removed. It is crucial to fix your upvc window handles when you begin to notice them falling off. This will prevent possible break-ins and ensure that your home is safe.

It's a task that anyone can complete. With just a few tools and the proper knowledge, this is a simple process that shouldn't take longer than a couple of minutes. It is important to know the kind of handle or lock that you have on your window. This will allow you to choose the right replacement.

Inline Espagnolette Handles

They are typically located on the side of the window. They are flat and come with an opening that engages the locking mechanism of the window frame. Inline upvc handles have a spindle running through the middle of the handle into the window frame to operate the latch.

Cockspur Handles

They are typically found on older uPVC window frames. They have an unusual hook-shaped design. Cockspur handles are secured to the frame of the window sash replacement with one screw, and are less secure than other varieties of window handle.

Tilt and Turn Handles

The tilt and turn handles differ from other upvc handles in that they can be turned for opening the window, and then tilted to the window to let air circulate. They feature a 7mm spindle in the back and are available in right and left-handed versions.

It is crucial to determine the spindle size when buying replacement upvc handle. Not all are the exact same size. Drop something in the middle of the hole to measure the length. This is the maximum spindle length that will fit in your window.

What is the spindle?

uPVC window handles work in a similar way to doors. By turning the handle, you are able to operate a latch within the frame. This unlocks the window so it can be shut and opened. The handles could be damaged, particularly if they're often used or are subjected to harsh conditions. This can leave you needing to replace your uPVC handles for windows as they might not be able to operate the window properly in the future.

There are a variety of uPVC handles, including Espag, Cockspur, and Spaded handles. These handles are made in a variety of ways to fit into uPVC frames. Each handle style uses an entirely different spindle for locking the window mechanism. This is why it is important to know what kind of handle you have installed on your uPVC window to get the correct replacement.

The base of the handle will tell you what type of uPVC it is. A snap-in cover should be over the screw that holds the base of the handle in position. After removing this, you will be able see the second screw that holds the handle base in position. After both screws have been removed, you should be able pull the handle from the uPVC.

After taking off the uPVC handle, remove it from the locking mechanism. Note the length of the spindle. You'll need purchase a replacement with the same length as the handle that was originally used and locking device.

The spindle wears out and cannot operate the locking mechanism. This could be due to corrosion, damage due to constant use or the locking mechanism becoming looser. When this happens it is required to replace the window handle and the locking mechanism to restore the full functionality to your uPVC windows.

How do I get rid of the old handle?

Window handles can become damaged or even broken over the course of time. It is important to fix them as soon a possible to ensure your security. Fortunately, replacing a damaged or worn handle is a relatively simple task that can be accomplished in just over an hour and doesn't require any specialized tools.

The first step to remove the old handle is to remove the screw that is situated on the top of the handle base. Once the screw is removed, the handle will be pulled away from the base section. A second screw is located at the bottom of the handle. This too can be removed. Once these two screws have been removed, the handle can be detached from the base of the window.

Once the old handle is removed, grab the new handle and line up the fixing holes with the holes that are currently in the window frame. There might be a small sticker or caps on the new handle, so take off these if necessary and then screw the handle into its place. Once the handle is in place it is important to test that it is working by turning the handle, and ensuring that the lock mechanism activates.

Espag handles feature a spindle which protrudes out of the handle and slot into the multipoint locking mechanism that is on the window frame. Cadenza windows have an edge with cut-outs which slot into the lock mechanism, while Cockspur handles have a long nose that is able to hook over either the frame's outer or transom bar cross-member inside the window.

Once you have the new handle in place, slide the spindle inside the lock inside the window and then tighten it. When the handle is fixed in place, replace the'snap in' cover and the screw cap (if necessary). The handle is now ready to use by opening and closing the window several times to make sure that it functions properly and securely.

How do I install the new handle?

Switching your uPVC window handle isn't difficult and the process is quite simple. All you need is a screwdriver and a small amount of patience. The first step is ensure that the handle is not locked and then remove any screws that are visible, you can also replace them with screw caps if needed. After removing the handle you will need to note the length of spindle that extends from the back. This is crucial since it will determine the kind of handle that you will need to buy.

Espagnolette handles made of uPVC are the most sought-after type of handle. The spindle is inserted into the handle to activate the locking mechanism inside the window frame. The handle releases the latch and allows the window to open. When used regularly and time, handles for espagnolette may be damaged.

Cadenza handles are a type of uPVC handle that is commonly used in tilt and turn windows. They have a protruding knife that works with a multiple-point locking mechanism within the window. They are usually more secure than handles made of espagnolette because they can only be opened from the inside. You can replace them using the same procedure as you would for espagnolette handles however, make sure that the new handle is not angled and flat.