• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. They do not decay or rust as aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is important to take the time to make sure that you're doing everything you can to ensure that your windows are in good condition.

For single pane windows it can be relatively simple to replace them, and the replacement will usually fit inside the frame of the previous one easily. However, if you have double-pane windows that are held in place by internal beading it will be more difficult to take out the panes that are in place and replace them with new ones. In this instance it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

If you're planning attempt to remove the window panes by yourself, it is essential to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. It is also a good idea to lay down a drop cloth before you begin working on the glass so that any shards will fall onto the cloth instead of landing on the floor where they can be trampled upon and cause further damage.

It's a good idea to cover the gap with tape after the glass is removed. This will prevent water and drafts from entering your property until a professional is able to fix the window. This will also act as a barrier, preventing any intruders to gain access to your home. If the gap between the window and the door is significant, you may prefer security screens that includes windows. This will provide the best of both.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. However, over time, they may be afflicted by a variety of problems including sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from worsening.

Repositioning the hinges could aid in fixing a window that is sliding. First, you'll need to open the windows to access the frame. With a screwdriver, you can take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you have relocated your hinges. If you are happy with the fit of your window, you can tighten screws to secure them in the right position.

If you are unable to reposition the hinges, you could need to replace the seal. Over time rubber seals can lose their elasticity and dry out and cause them to loosen. If this happens, it's essential to replace the seal as soon as possible so that your uPVC windows are watertight and secure from draughts.

UPVC handles can also become loose. This is often caused by screws that have become undone over time, but it could be due to the handle mechanism wearing out. It's fairly simple to fix a loose uPVC hand. First, you'll need to shut the window and perform an experiment fitting. The joints at the corners of the sash must align with the joint on the casing. If it isn't you can use a screwdriver to loosen up the handle. Then turn the mechanism into position.

3. Water Leaks

It is crucial to take action if you wake up every morning to find mouldy walls and wet floors. Water leaks from windows are not just a cause for degrading of the structure of your home but also undermine your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be completed by any DIYer who has the ability. Depending on how serious the problem is, the old caulking may have to be removed. It is essential to remember that when it is about uPVC window repairs, you should not be tempted to 'over-caulk and then make the area harder to clean and reduce the efficiency of your energy.

Check that any drainage holes do not have debris in them and that the sill pan is properly angled to allow the water to drain from the window. In more serious cases you may need to think about replacing the window.

Mold spots and rotted sills are also signs of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to remember that if the leakage originates from the glass of your double-glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sagging. It is also possible to be repaired by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open, or if it opens with an ease. Anyone with the skills to fix them can replace hinges in just a few minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they will wear out over time. It is very easy to replace a hinge on a window however it is easier if someone else helps you hold the frame.

Check that the uPVC hinges are closed and open in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window repair should be opened.

The issue could be caused due to opening the window in the wrong way or due to a poor installation in the factory. It is usually possible to fix the issue by sending us a photograph through our website and we will be pleased to offer you suggestions.

It is also crucial to lubricate the hinges regularly. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. Ideally, you should perform this every year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by different factors. The hinges may also become disaligned as a result of wear, causing gaps between the frame and sash. This can be easily repaired by giving them a good cleaning, but in the event that they are beyond repair it might be necessary to have them realigned or replaced. The second is the interlock, which is located on the hinge side of the window repairs near me, may be misaligned. Again, it may be feasible to give them a thorough clean, however in certain cases, it may be necessary to have these replaced.

The next most common reason for draughts is window seals. These are prone to wear or damaged over time and will allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures and will reduce the risk of draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler, which can be placed over your window sill. They can keep your home warm by blocking cold air.

The windows made of upvc can keep providing excellent insulation and security for your home by performing regular maintenance and repairs. However, it is important to recognise that windows last for a certain period of time and there may come the point when it's more efficient to replace them than fix them. If you encounter any issues with your Upvc window it is recommended to speak with a professional immediately.