• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain, durable and long-lasting. They are not susceptible to rot or rust like aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a great deal of damage to your home, making it very hazardous and possibly fatal. It is important to take the time to make sure that you're doing everything you can to keep your windows in good condition.

For single pane windows it can be relatively simple to replace windows, and the new one will generally fit within the frame of the previous one easily. However If you have double pane windows that are held in place by internal beading, it'll be more difficult to get rid of the panes that are in place and replace them with new ones. In this instance you'll need source some plastic spacers that assist the new pane to fit perfectly into the frame of the window.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you begin working on the glass so that any shards fall on the fabric rather than on the floor where they could be trodden under and cause further damage.

Once the glass has been removed, it's a good idea to cover the gap with packaging tape or duct tape to block water and drafts from getting into the property until a professional comes out and fix the window. It also acts as a barrier that will prevent any intruders from getting access to your home. If the distance between the window and the door is significant, you may need to consider a security screen that also has an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can be affected by a variety of issues such as sagging. A window that isn't properly aligned can cause problems with light, draughts, and even security. It's important to take action when you realize that your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window which is sliding. You'll first need to open the windows so you can access the frame. With an screwdriver, unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close your window repair and verify the an appropriate fit. If you're satisfied with the size of the window, you can tighten screws to hold them in place.

If you are unable to reposition the hinges, you may require replacing the seal. Over time, rubber seals lose their elasticity and become dry which causes their tightness to decrease. It is important to replace your seal as quickly as you can in order to ensure that your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. This is usually due to screws that have loosened over time, but it could be caused by the handle mechanism getting worn out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. First, you'll need close the window and perform a test to ensure that it fits. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't, you can make use of a screwdriver to loosen the handle and turn the mechanism back into its original position.

3. Water Leaks

If you awake to damp floors and mouldy walls every time it rains it is important that you take action. Windows that leak water do not only lead to the degrading of the structure of your home but also hamper your efforts to regulate the temperature within your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or not present.

This is an easy fix that can be completed by any DIYer who is competent. Based on the severity of the problem the caulking used previously might need to be removed before a fresh layer can be put on. It is important to keep in mind that when it is about uPVC window repairs you should not be tempted to 'over-caulk and then make the area harder to clean and could reduce the efficiency of your energy.

Check that any drainage holes are free of debris inside them and ensure that the sill pan has been angled correctly to drain away from the window. In more serious cases you might need to consider replacing the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives under conditions of dampness and can spread quickly throughout the house.

If the leakage occurs between the double-glazed glass it is more likely the issue is more with the seal rather than the frame. This can be easily repaired by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open with a breeze, it may be hinges that are at the fault. They can be repaired by any DIYer who is skilled and can be done within a few minutes.

Like any mechanical part, hinges can be damaged over time. It's easy to replace a hinge on a window, but it's easier if someone helps hold the frame.

Verify that the upvc Window Repair hinges are open and closed in the correct direction. Look for the arrows on each hinge to determine which way the window should be opened.

window repair near me hinges that aren't working properly could be the result of incorrectly opening the window in a certain manner or because of improper installation in the factory. This can often be resolved by sending us a picture through our website and we will be happy to give you suggestions.

It is also important to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant on the hinges is a great way to do this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the possibility of a window sticking and prevent corrosion. Ideally, you should perform this every year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a few different things. The hinges may also become unbalanced due to wear, which can cause gaps between the frame and sash. If they are damaged beyond repair, it may be necessary to get them re-aligned. The second is the interlock, which is located on the hinge side of the window and can also be misaligned, and again it may be possible to give them a good clean, but in certain cases, it may be necessary to have them replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to stop draughts. Another option is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures, and also reduce the possibility of draughts.

Another method of reducing drafts effectively is to use a draught-excluder. These are typically fabric tubes filled with a filler, which can be hung over your window sill. They can help block out cold air and keep your home warm and cosy!

Your windows made of upvc will keep providing excellent insulation and security for your home with a little regular maintenance and repairs. However, it is important to recognize that all windows have a lifespan and there may come the point when it's more economical to replace them than repair them. So, if you are experiencing problems with your upvc windows, it is always recommended to seek help from a professional as soon as you can.