• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don't rust or rot.

It is important to clean and oil UPVC windows and doors regularly. This will save you from unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home, and could even be fatal. It is essential to make sure that your windows are in good condition.

For single pane windows, it can be relatively simple to replace them, and the replacement will generally fit within the frame of the previous one easily. However when you have double pane windows that are anchored by internal beading it will be more difficult to get rid of the existing panes and install new ones. In this case it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass by yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes, so that any shards fall on the fabric, not onto the floor and could be trampled under.

It's a great idea to tape the gap once the glass has been removed. This will prevent drafts and water from getting into your property until a professional is able to fix the window. This will also act as a barrier that will prevent any intruders from gaining entry to your home. If the gap is large, you may want to consider using a security door that has an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash windows. Over time, they can develop a number of problems that include sliding. A sagging window repairs near me in uPVC can cause problems with light, draughts, and even security. It's crucial to act immediately if you realize that your uPVC windows are sliding.

To fix a window that is sagging you can try to reposition the hinges. First, you'll need to open the windows so you can access the frame. After that, using the screwdriver, you'll be able to take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you have repositioned your hinges. If you're happy with the fit, you can tighten the screws to ensure they stay in place.

If you are unable to move the hinges, you could need to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause them to loosen. It is important to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

uPVC handles may also become loose. This is often caused by screws that have loosened over time, but it can be due to the mechanism of the handle wears out. It's relatively easy to fix a loose uPVC hand. First, you'll need to shut the window and perform an experiment fitting. The corners of the sash must be aligned with the casing joint. If it does not then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is important to act if you get up each morning to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and impact your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix that can be done by any competent DIYer. Depending on the severity of the issue the caulking that was used up may require removal before a new layer of caulk is applied. It is important to remember that when it is about uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area harder to clean and could decrease the efficiency of your energy usage.

It is important to check that the drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious instances, you may need to think about replacing the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. The mold thrives in damp environments and can quickly spread throughout the house.

It is also important to note that if the leak is coming from between the glass of your double-glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sliding. Again this can easily be fixed by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or if it blows open with an ease. Any competent DIYer can replace these in a matter of minutes.

Like any mechanical component hinges are prone to wear out over time. It's very simple to change a window hinge but it's much easier if someone helps you to hold the frame.

It is also important to ensure that the Upvc Window Repair hinges are being opened and closed in the correct direction. You can do this by looking for the arrow on each hinge. This indicates the direction in which the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a particular manner or because of poor installation at the factory. Sending us a photo via our website will often resolve the problem. We are more than happy to give assistance.

It is also essential to lubricate the hinges regularly. Applying an engineering lubricant that is light to the hinges is a great method to accomplish this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It also helps prevent corrosion and decrease the chance of sticking. This should be done at least once a year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. Firstly the hinges, again because of wear and tear, may become displaced, which will cause a gap to form where the sash meets the frame. This can be easily fixed by giving them a good clean, but when they're beyond repair, it could be necessary to get them realigned or replaced. The second is the interlock, which is on the hinge side of the window, can also become misaligned, again it is possible to just give them a good clean, but in some instances it could be necessary to get them replaced.

The seals may wear out or become damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help to regulate indoor temperatures and lessen draughts.

Another, and most effective ways to reduce the draughts in your home is to use an draught excluder. These are usually fabric tubes that are filled with some sort of filler and can be positioned on the windowsill on top. They can keep your home warm by blocking cold air.

With a bit of regular maintenance and repair your windows made of upvc will continue to provide a great level of security and insulation for your home. It is essential to remember that all windows eventually get worn out and it is more cost-effective to simply replace them than to repair them. So, if you are having issues with your upvc windows, it is always recommended to seek help from a professional as soon as possible.