• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they don't get rusty or decay.

It is important to clean and oil UPVC doors and windows on a regular basis. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home, and could even be fatal. It is essential to ensure that your windows are in good shape.

For single pane windows it is relatively easy to replace them, and the new window will generally fit within the frame of the previous one easily. If you have double-paned windows that are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this case you'll need to locate some plastic spacers that will aid the new pane in being able to fit perfectly into the window frame.

If you are going to attempt to remove the window panes by yourself it is important to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also a good idea to lay down a drop cloth prior to when you begin working on the glass, so that any shards will fall on the fabric instead of landing on the floor, where they could be trampled on and cause further damage.

It's a great idea seal the gap after the glass has been removed. This will prevent drafts and water from getting into your home until a professional is able to repair the window. This will also provide a barrier to prevent any criminals from getting into your home. If the gap is particularly large, you may be interested in a security door that has an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash windows. However, with time, they can suffer from a variety of issues like sagging. A sagging uPVC windows can cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from becoming worse.

To fix a sagging window you can try to reposition the hinges. First, you'll need to unblock the windows to access the frame. With the screwdriver, you'll be able to unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and check for fit. If you're satisfied with the size of the window, you can tighten screws to secure them in the right position.

If you are unable to move the hinges, you could need to replace the seal. As time passes, rubber seals lose their elasticity and dry out which causes them to lose tightness. If this happens, it's crucial to replace the seal as quickly as possible so that your uPVC windows remain watertight and safe from drafts.

uPVC handles could also become loose. This is typically caused by screws that have loosened over time, but it could be due to the handle mechanism wears out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. First, you'll need to shut the window and then perform an experiment fitting. The corners of the sash should be aligned with the casing joint. If it doesn't, you can use a screwdriver to loosen the handle and reverse the mechanism back into position.

3. Water Leaks

It is essential to act if you wake up every morning to find mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature of your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or is missing.

This is a relatively easy fix and should be undertaken by any skilled DIYer. Depending on the severity of the issue the caulking used previously might need to be removed before a new layer of caulk can be put on. It is important to keep in mind that when it comes to uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area harder to clean and can decrease the efficiency of your energy usage.

Verify that the drainage holes do not have debris inside them and that the sill pan is properly angled to drain away from the window. In more serious situations, you might need to consider replacing the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage is occurring between the double-glazed window, it is more likely the issue is more with the seal rather than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your Upvc Window repair windows are brittle to open, or slack and open with ease It could be hinges at the fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Like any mechanical part, hinges can be damaged over time. Changing a window hinge is essentially a very simple process but it can be easier with someone else to help you hold the frame up.

Verify that the uPVC hinges open and close in the proper direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window a certain way or due to improper installation in the factory. Sending us a picture through our website can often resolve the problem. We are happy to provide assistance.

Regularly lubricating the hinges is also necessary. This can be accomplished by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. Ideally, you should perform this every year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a few various factors. The hinges, also due to wear and tear can become misaligned, this can cause gaps to develop where the sash joins the frame. These can be easily repaired by giving them a good cleaning, but when they're beyond repair, it might be necessary to get them re-aligned or replaced. The interlock, which is located on the hinge of the window repair, may be misaligned. Again, it may be possible to just give them a thorough clean, however in some instances it could be necessary to have these replaced.

The next common reason for draughts is window seals. They are prone to wear or damaged over time and will allow air to escape through the gaps. Replacing these with high-quality weatherstripping will help to prevent draughts. Replace the upvc windows with low-emissivity glass. This will help control indoor temperatures, and reduce the risk of draughts.

The final method to cut down on drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler that can be hung over your window sill. They will keep your home warm by blocking out cold air.

The windows made of upvc can remain a great source of insulation and security to your home by performing regular maintenance and repairs. It is essential to remember that all windows eventually wear out and it may be more cost-effective to replace them rather than repair them. If you are experiencing issues with your upvc window repairs near me window it is recommended to speak with an expert as soon as possible.