• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

The traditional torque tool is made from stiff, flat spring steel, bent at a 90 degree angle to provide a small blade that fits in the keyway and a long handle to which torque is applied. The pick must be strong enough to resist bending or breaking while lifting pins, yet the shaft must be small and thin enough to maneuver freely around the keyway without disturbing other pins. A functional pick kit should contain several different size hooks to accommodate a range of different keyway shapes. The selection of the torque tool is just as important as that of the pick, but, again, commercial pick kits often fail to include a sufficient range of sizes and designs to allow good control and feel across the range of common locks. Falle-Safe Security makes a set of vertically-oriented two-prong torque tools designed to fit snugly in a range of different pin tumbler keyways. Unfortunately, these designs are less than ideal, and many of the "standard" picks are too large to fit and move comfortably in common lock keyways. Worse, they often omit the designs that are of the most practical value.

Over the years, the locksmithing industry has settled on a number of "standard" pick designs. The picks are made by Peterson International (a locksmithing tool vendor in upstate New York with manufacturing facilities in South Africa). It is not clear what some of these picks are intended to actually do. Picks probe and lift the individual pin tumblers through the keyway, while torque tools control the degree and force of plug rotation. Picking tools are designed to perform one of two basic functions: manipulating pins and turning the plug. Other names for the torque tool are turning tool, torque wrench, torsion wrench, and tension wrench. The following rules are based on the Billiard Congress of America's (BCA) official rule set. It's much easier to learn each skill in isolation, using locks specifically set up for the purpose. If the torque tool is too thin, it will tend to be "springy" and will absorb much of the fine movement and control needed to successfully pick better quality locks. In general, the torque tool should be as thick as possible while still fitting in the keyway, and of a width sufficient to provide good control but without interfering with the picking tool's access to the pins.

Other differences between picks, aside from the shape of the tip, are the material, finish, width and thickness of the tang shaft, and the shape and material of the handle. The shape of the tip is the most obvious difference between picking tools, with hooks, half-diamond, ball, double ball, wave, sawtooth and other styles available. The basic skills of pin tumbler lock picking include selecting the proper tools, manipulating pins through the keyway, applying torque, and recognizing the state of each pin. A few basic tools are sufficient to pick the majority of commonly used locks. These locks are specially pinned to facilitate a more step-by-step approach. Longer handles are as a rule better in torque tools; the farther from the plug the torque can be applied, the easier it is to detect and control fine movement. The rest is just technique -- locating and recognizing the state of each pin stack, manipulating the pins, applying torque to the plug. The tool should amplify, not dampen, the rotation of the plug. Another style of torque tool has two "prongs" that fit in the top and bottom of the keyway, with a cutout between them for the pick. When deciding on a pool table size to fit into a home or other space, buyers should also take into consideration the size of the pool cue.

The tool must have a good fit to be effective, however. Without the added parameter of spatial memory, this "idealized game of billiards" (under certain conditions) is a perfect example of mathematical chaos, where initial conditions can not necessarily, but when considering spatial memory, the conclusions have profound implications for biological research, such as Professor Slime Mold. Much of this is simply a matter of individual preference, but certain choices here can also have an impact on performance. Torque tools may be oriented vertically (with the handle in line with the keyway) or horizontally (with the handle perpendicular to the keyway); different people have different preferences. In this regard the NF must provide any comments it may have to the CF within 7 days. In this regard a Ratified Event is one has been approved by the WPA Board - see paragraph 50 and following below. So where do we see elastic collisions in real life? During play, when a player cannot hit the ball that the rules require him to hit (because of obstruction by another ball or balls), he is said to be snookered and loses his turn; this situation gives the game its name.

If you have virtually any issues regarding wherever in addition to tips on how to make use of what is billiards, you are able to e-mail us in our own webpage.