• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are durable, long-lasting and easy to maintain. They do not rot or rust like aluminum or timber.

It is important to clean and oil UPVC doors and windows on a regular basis. This will reduce repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge amount of damage to your home, making it very dangerous and potentially fatal. It is essential to make sure that your windows are in good shape.

Single-pane windows are fairly simple to replace, and they typically fit into frames that were previously in use very easily. However, if you have double pane windows that are held in place by internal beading it will be more difficult to remove the panes that are in place and replace them with new ones. In this case you'll need source some plastic spacers to assist the new pane to fit correctly into the window frame.

If you plan to attempt to remove the glass panes yourself, it is essential to wear appropriate safety gear, including thick gloves and eye protection. It is also an excellent idea to lay down a drop cloth before you start working on the glass, so that any shards fall on the fabric instead of landing on the floor where they can be trodden under and cause further damage.

After the glass has been removed from the window, it's best to cover the gap with packaging tape or duct tape to stop drafts and water from entering the property until a professional can come out and fix the window. This also serves as an obstacle to stop intruders from making their way into your home. If the gap is particularly large, you may be interested in the security door with an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. In time, they could develop a number of problems that include sliding. A window that isn't properly aligned can cause problems with light, draughts, and even security. It's crucial to act when you notice your uPVC windows are sagging.

Repositioning the hinges could aid in fixing a window that is sagging. First, you'll need to unblock the windows so you can reach the frame. Then, you can remove the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and test it for an appropriate fit. If you're happy with the fit, tighten the screws to ensure they stay in the right place.

If you are unable to move the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity over time, leading them to lose their tightness. If this happens, it's crucial to replace the seal as fast as you can to ensure that your uPVC windows are watertight and secure from draughts.

uPVC handles can also loosen up. This is often caused by screws that have been removed over time, but it could be caused by the handle mechanism getting worn out. It's relatively simple to repair a loose uPVC handle. The first step is to close the window and then perform an initial test fit. The corners of the sash need to be aligned with the casing joint. If it isn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism to position.

3. Water Leaks

It is essential to act if you get up each morning to discover mouldy walls and floors that are wet. Water leaks from windows can not only cause degradation of your home's structure but also undermine your efforts to regulate the temperature inside your home. Most often, upvc Window repair window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be completed by any DIY expert. Depending on how severe the issue is, old caulking might need to be removed. It is crucial to remember that when it is about uPVC window repairs, do not be tempted to apply too much caulk' as this will only make the area more difficult to clean and could reduce the efficiency of your energy.

Make sure that the drainage holes do not have debris in them, and also that the sill pan is angled correctly to drain away from the window. In more serious situations, you may have to replace the window.

Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. The is a fungus that thrives in damp conditions and can quickly spread throughout the house.

It is also important to remember that if the leakage is coming from between the glass in your double glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and blow open with ease It could be hinges that are at fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that use hinges and like any mechanical part they will wear out over time. It's easy to change the hinges on a window, but it's simpler if you have someone to help you to hold the frame.

Check that the uPVC hinges are open and closed in the proper direction. You can check this by looking for the arrows on each hinge. This indicates the direction in which the window should open.

The problem can be caused by opening the window improperly or by a poor installation at the factory. Sending us photos through our website can often solve the issue. We are always happy to give advice.

It is also crucial to lubricate the hinges on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It also decreases the possibility of a window getting stuck and stop corrosion. This should be done at least every year. WD40 or other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by different things. Firstly the hinges, again because of wear and tear, can become misaligned, this will cause gaps to develop where the sash joins the frame. This can be easily repaired by giving them a good clean, but if they are beyond repair it could be necessary to get them aligned or replaced. Secondly the interlock, this is located on the hinge side of the window, may also be misaligned, and again it may be possible to just give them a good clean, but in certain cases, it may be necessary to have these replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping can help keep draughts at bay. Another alternative is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures, and also lessen draughts.

Another method of reducing the amount of draughts is to use a draught-excluder. These are usually made of fabric tubes filled with a filler which can be put on top of your window sill. These will help to block out cold air and keep your home warm and cosy!

With a bit of regular maintenance and repairs, your upvc windows will provide an excellent level of security and insulation for your home. It is crucial to keep in mind that all windows eventually get worn out and it could be cheaper to replace them rather than repair them. So, if you are experiencing issues with your Upvc windows, it's recommended to seek help from a professional as soon as you can.