• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

In Wall Fireplace - How to Choose the Right Height and Depth for Your Fireplace

A fireplace built into the wall gives a sleek, polished look without having to pay for mantles. It is one of the most simple electric fireplaces to set up.

There are a few aspects to take into consideration prior to purchasing your in wall fireplace. Follow these suggestions to get the most of your investment.

Height

It may seem like an easy question, but determining the height of your fireplace is one of the most important decisions you'll make. The height of your fireplace will influence everything, from how it will fit into a space to its visibility. Having your fireplace raised too high can look unnatural and take away from the aesthetics of the piece. On the other the other hand, having your fireplace too low can cause it to be lost in the wall space.

Luckily electric fireplaces are adaptable enough to be placed at a variety of heights. Most people mount their fireplaces from a sitting position at eye level. This typically requires a height of between 40 and 42 inches from the floor to the bottom of the fireplace. Some people place their fireplaces under their TVs, which can be a visually appealing option.

The height of your fireplace is contingent on a number of factors, including the dimensions and length of the wall you want to put it on. The larger the space is, the bigger it will be. This could mean that you're in a position to fit a bigger fireplace in it. The length of the wall is also crucial since a wall that is larger can accommodate a bigger fireplace.

The way you intend to make use of your fireplace is an important factor. If you plan to use it to decorate your home, a lower height is best. If you're planning to use it to heat your home using it, you'll need ensure that the fireplace is tall enough to meet the local codes and safety standards.

Having the proper height for your fireplace will allow you to ensure that it matches the decor of the room and is easy to work with when cleaning or filling it. If you're not sure what height to go with it is always a good idea to reach out to an expert fireplace installer for assistance. They can recommend the ideal height for your fireplace according to their experience and your home's design.

Depth

A fireplace's depth is important to consider if you intend to put it in a recessed place. If you plan to cut into the wall, ensure that you have enough space to accommodate the fireplace's internal design (the space for the smoke shelf above the firebox as well as the flue that rises from the roof). You should also think about the space available for the surround and if you want a fireplace mantle.

A lot of the most recent electric fireplace models have a depth which is almost invisible, creating an "integrated" look. The Panorama BI-Deep series is an excellent illustration of this kind of electric fireplace that is wall-mounted. This model features an 5.8-inch depth that lets the viewer see the flames and ember bed, not the frame of the fireplace. It also comes with a choice of media packages including natural-looking driftwood logs that look like driftwood white pebbles, crystals made of clear glass that reflect the flames and add luster to the ember bed.

Wall-mounted gas fireplaces are also available in deep and shallow versions. When deciding the depth of your fireplace it is important to keep in mind that these fireplaces are supplementary heating sources and must be properly vented by a skilled professional. When determining the depth for gas fireplaces it is important to consider the length of the vent pipe as well as the size of the chimney.

It is essential to read and adhere to the instructions provided by the manufacturer before installing your fireplace. A professional installer is recommended in most cases. It is also recommended to have a second person available to install the fireplace.

The addition of an in-wall fireplace space to your home is a fantastic way to increase the value of it and create ambiance. It also can reduce the cost of heating. It is also a great alternative for those who are unable to install a traditional fireplace in your home due to space constraints or due to the location of the chimney.

Surface Mount

If you're unable, or Www.0773781.Xyz - 0773781.Xyz - prefer not to cut into your wall or create a space to accommodate an electric fireplace, a surface mount gives a sleek and built-in style. Certain models, such as the Allusion line, can even be installed partially recessing in a wall without compromising the heat output or aesthetics.

To begin the installation, mark the wall with a pencil on the wall where the bracket is to be mounted. Use a stud-finder to locate the studs and place each bracket in front at least one stud to ensure stability. If a stud is not in reach or doesn't work for your fireplace, you can use anchors for drywall to help support the mounting bracket.

After you have determined the position of the mounting brackets on the wall using a power drill, you can use it to install them and ensure that they are properly aligned with the studs. If possible, attach each bracket to a stud for strength and stability, but you could also use plastic anchors in the event of need. After the mounting brackets have been installed, lift the fireplace and hang it from the bracket. After it's secured, you can check the position of your fireplace to make sure that it's straight and not crooked within the opening.

Before you proceed with the installation, plug in your fireplace and make sure whether all features are operating properly - turn on the fire, and then light up the flames, play around with embers, heat, bed lights and more. When you are satisfied with the result, it's time to install the floating mantel.

Based on the model of your fireplace, you'll either require a wire connection to the appliance wire connector 0773781.xyz (Https://www.0773781.Xyz) on the mantel's bottom or in the event that your fireplace has slots or hooks on the back connect them to the slots on the wall mounting brackets. Once you've completed this step, consult your fireplace's user manual for directions on how to remove the glass front panel from the opening and replace it.

If you want to adjust the height you can replace the glass front after you have removed the front panel. If your fireplace includes ember bed media spread it over the top of the grille to create a natural appearance. Then, secure it with the screws that come with it.

Plug-In

Electric fireplaces don't require chimneys or vents as do traditional wood-burning ones. They plug into standard outlets they can provide additional heating to rooms that are up to 400 square feet. You can also adjust the ambience with a variety of heat and flame settings. Certain models have LED lighting effects that accentuate the fire and ember bed. Some models feature an upper grille that hides the manual controls, however they can easily be opened to reveal pushbuttons.

Electric fire places that plug in can be installed directly on the wall or recessed for the appearance of a built-in. They are typically more straightforward to install than mantel fireplaces. Some units include a pedestal to allow you to put the fireplace on flat surfaces such as dressers or buffets. A remote control as well as mounting hardware and a log set are included. Based on the model, these electric fireplaces can include heating and flame options that can be turned off for all-year-round comfort.

Certain models come with adjustable privacy glass that you can change instantly from fully transparent to partially. This feature makes these models popular for walls that separate common areas of entertainment like living and dining areas. These models can be utilized in bedrooms, where fireplaces is a cost-effective way to warm up a room and keep it private.

While plug-in electric fireplaces don't need to be hardwired as built-in models, they must be positioned on the wall that is at least stud-free and capable of supporting the weight of the fireplace. Certain models come with a kit which includes a pre-wired cord and a special bracket that makes the installation process less difficult. This kit can be used for construction of drywall or concrete.

When deciding on a place for your wall mount electric fireplace, ensure that it's close to an electrical outlet. Depending on the model, plug-in electric fireplaces can be plugged into outlets that are connected to the same circuit or a dedicated one for your electric fireplace. It is suggested to have a separate circuit so that no other appliances in your home can run on the same voltage. This could cause a trip to your circuit breaker.