• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

ghost install Immobiliser 2

Protects your vehicle against key cloning and prevents thieves from driving it with original keys. Our latest immobiliser is connected to your vehicle's CAN data network and a unique PIN has to be entered in order to start the engine.

Ghost, unlike trackers, does not emit radio frequency signals and cannot be identified by diagnostic tools. Ghost does not have LED indicators or buttons to indicate its presence in your vehicle or van.

Anti-key cloning

The local ghost immobiliser installer immobiliser was created to fight key hacking and cloning. The device connects to your vehicle's CAN data network and creates a unique pin code push sequence by using the factory buttons on your dashboard and the steering wheel. This prevents the thief being able to start your car. If the incorrect PIN is entered, it will stop your engine from starting and making it impossible to leave with your joy and pride.

Ghost immobilisers use new technology that is very difficult for thieves to beat. The ghost immobiliser, unlike physical deterrents like wheel locks or steering locks that are able to be cut, is a discreet electronic device. It's not even identified by thieves since it doesn't emit radio signals and is operated in a silent manner.

The next-generation immobiliser protects your vehicle from a range of threats, such as key-hacking relay attacks, key-hacking, and cloned copies. It also stops thieves from stealing keys or replacing your ECU because it won't permit them to start the car without first entering the correct PIN code.

In contrast to other immobilisers the ghost immobiliser 2 does NOT require a remote or key fobs to operate. It is able to be deactivated via the driver's mobile using a simple app. This is ideal for those times when you have to give your car over to valet parking or maintenance without keys.

The autowatch ghost installation walsall ghost immobiliser car-II represents the latest evolution of Ghost immobiliser. It is designed to be as simple and user-friendly as possible, but remains as secure as ever. This is done by connecting the Ghost-II into the vehicle's data network CAN, which means that there are no wires to hide or be easily identified. It also has a built-in feature that allows you to disable your Ghost-II by simply connecting to the vehicle's Bluetooth, so you can go out and drive hassle free.

OBD port hacking

OBD port hacking is the latest method being used by professional car thieves to steal cars. Thieves can gain access to your vehicle's OBD with an laptop, mobile application, and a few cables that can be bought on the internet for less than PS50. Once they have access, they are able to do anything they want including resetting your vehicle's fault codes, tuning your car, or taking it away within a matter of minutes.

It can protect your vehicle from being stolen by requiring a specific PIN number to be entered in conjunction with your key fob before you start the engine or leave. It communicates with the vehicle's ECU (Engine Control Unit) via the CAN Data Circuit. It is not detected by any scanning technology, RF or code grabbing. It comes with a Service/Valet mode that allows your vehicle to start with no PIN code.

To make use of an OBD hacking device you require a laptop with software capable of interpreting the OBD protocol. These can be bought for less than PS100 on ebay or Amazon. Also, you will require a cable with OBD pins connected to the CAN Bus. These cables can be bought at Amazon or Ebay for around PS50. You then need to splice the cable into the wiring harness of your car for example, in the radio wiring harness.

Once the hacker has gained a connection to your vehicles OBD port, they will send diagnostics requests to the system at a high baud rate that can crash the CAN, and prevent systems within your car from working. This could cause the engine to stop, doors to lock and even the brakes to be engaged.

There is no need for additional remotes or key fobs

The car immobiliser is an excellent piece of anti-theft technology that is utilized by millions of modern vehicles all over the world. An aftermarket immobiliser safeguards your vehicle through the use of engine ECU software that blocks vehicles from starting when the transponder is false.

It is possible for thieves, if they have the code to disable an immobiliser, to bypass it. The batteries in the majority cost of ghost immobiliser key fobs can be easily removed by removing it, so a thief can use a simple tool to remove the immobiliser's inner circuit board and replace it with a blank. Then, they'll be capable of starting your vehicle.

With the TASSA approved Ghost 2 immobiliser, there are no additional keys or remotes required. The immobiliser connects to the engine ECU (Engine Control Unit) via a subtle, silent data circuit in CAN that is undetectable with diagnostic tools like those used by high-tech thieves. It also does not make use of a traditional key-fob that has LED indicators, meaning it is able to go unnoticed in plain sight.

There will be times when you need to deactivate Autowatch Ghost 2's automatic protection, for example during a valet parking or service work. The ghost CAN immobiliser comes with a specific mode for this, referred to as 'Service Mode' which is activated by a push of an app on your smartphone. The car can still be operated, but its maximum speed will be restricted to 36 mph for added security.

If you'd like more information about the TASSA accredited ghost immobiliser, call us today to book an appointment in our workshop. A member of the team will provide the entire process of the system's operation and will provide you with owner's manuals, installation certificates, Ghost 2 emergency card and a security guarantee.

Simple process to change the PIN code

Ghost is a new generation device that secures your vehicle without cutting wires or adding aftermarket key fobs. It is directly connected to the vehicle's CAN data network, and a personalised PIN code is programmed into it by pressing buttons on your steering wheel and the dash. The device doesn't emit RF signals, therefore it is not able to be tampered with. This makes it undetectable by sophisticated RF scanning or code grabbing technology that modern thieves employ.

The PIN code is able to be changed to lock out earlier drivers or include an override code in case you forget the sequence. The installer will show you the process to do this during installation. The system also has the option of a valet mode that can be used to temporarily disable the pin input sequence so that your mechanic or garage can repair the car without needing to know the code. This is great for customers who want to hand over their car for valet parking or service but don't want to divulge the pin sequence.

Contrary to Thatcham products which require additional key fobs to operate, ghost installation is a discreet system that uses the buttons on your car to create a unique interchangeable PIN code sequence. This sequence is entered using the app on your smartphone, which means that no additional LEDs are being thrown, and your vehicle is safe from the risk of being disabled by hackers or any other technology.

Every vehicle is tested

In contrast to key fobs that require you to press buttons on them and a ghost immobiliser can be hidden under your dash or steering wheel so that only you know that it's there. The device is connected to the CAN network of your vehicle and a PIN code can be programmed using the buttons on your car. The system will not allow your vehicle to start until this code is entered. This means that thieves cannot duplicate the keys on your car or gain access to the OBD port to hack your vehicle.

Ghost can be installed in all vehicles, including electric cars, motorhomes, vans and bicycles. It's also extremely versatile and can be set to deactivate in a variety of situations. For instance, it can be programmed to enter Valet mode when the vehicle is taken to a valet park or a service provider. This means that your vehicle can be operated within a set 30mph speed limit and the ghost immobiliser will reactivate itself when it is returned to your property.

Another great feature is that the device can be reset to your personalised PIN code at any point. This is beneficial in the event that you forget your code or the device becomes inoperable which means it's like new.

It is also inaccessible to anyone who doesn't even know what it is. This is due to it running through the buttons that are already on the dashboard of your car and on the steering wheel, and uses the data they transmit to determine the buttons that have been pressed. This makes it a secure and reliable security system that can't be tampered with by jamming, RF scanning, or door lock pick sets.