• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Properly Start a Wood Burning Stove

Wood stoves are a comfortable way to heat a room and save energy. However, they require an amount of care.

A majority of modern wood stoves comply with EPA emissions guidelines. Look for an EPA sticker either under or on the grate to ensure your stove won't produce lots of harmful pollutants.

How to Start a Wood Fire

The scent and sound of a fire made from wood can be a welcome feature in any house. But it's important to learn the proper way to build a fire in your stove. Incorrect methods can result in a fire that doesn't burn effectively and can cause smoke or creosote. These tips will help you start an fire that can heat your home with the least effort and with the highest safety.

Make sure to check the condition of your coals and logs before you begin the fire. If they're wet, it will smother your fire and prevent the proper burning. You might want to open the chimney to get rid of any ash that falls into the stove.

Begin by placing a few small wood burners for sale newspaper pieces that are dry in your stove. This will help ignite the tinder and ignite the kindling. Once they start to burn, add another layer of larger pieces to the top of the pile. This should be done using an arc pattern so that there is air between each piece.

If you have a wood stove with an automatic combustion control that will automatically deliver an air stream that is controlled to your fire as it builds. This will enable the fire to burn at a steady rate without the need to open the stove door to tend it.

It's important to avoid using excessive tinder as it can cause a fire that burns at an extremely high rate and fails to use the fuel as efficiently as it can. After you've built a solid bed in your stove of tinder, kindling and embers begin the main flame by laying two large logs of the base on the grill. Then, on the top of these base woods lay a layer parallel to them. This "top-down" method of creating the fireplace will create a long-lasting, efficient fire that doesn't engulf larger logs from the base.

Once your fire is well established Close the damper and ensure it stays closed. Opening the damper too soon can cause the fire to smother and will not allow for the proper air flow, which will decrease the efficiency of the fire.

Add Wood

Stoves aren't just beautiful home decor pieces - they can help you save money by providing efficient wood heat. They can be used in conjunction with central heating systems or furnace to provide additional heating in large homes. A lot of the stoves that are clean burning available on the market use advanced combustion principles that can separate the burning volatile substances from combustible gasses and tar. This is accomplished by providing air at two distinct stages. The first stage is for the vaporization and the second step is to provide pre-heated fresh air. This improves combustion and reduces smells.

The amount of heat that you get from your stove is contingent on both the species of wood and the amount of moisture as well as the size of the logs. The logs must be stored in a well-ventilated area for several months before you attempt to burn them to give the wood time to dry out. If the logs contain excessive moisture, they will produce steam, which is basically wasted energy.

It is best to add wood to the pile at intervals, not all at all at. Addition of too much wood all at once can cause the temperature to rise within the firebox, causing the formation of a vortex that draws smoke and unburned volatile compounds back into flames. This could reduce the effectiveness of your stove.

Avoid burning other combustibles in your stove, such as paper or cardboard because they are not wood. They have different physical properties and cannot be burned without creating dangerously high temperatures. You should not burn compressed combustibles such as wood briquettes because they differ in physical and chemical composition from firewood. They are also not approved by the type to be used in wood-burning stoves.

If you're planning to install wood-burning stoves into your home, it is essential to have it installed and tested by a professional. A certified WETT technician will test the installation to ensure proper operation and safety as well as make sure that your chimney is operating properly. They provide maintenance services for your chimney and stove to ensure they remain in top shape. They can check the areas that are accessible to your chimney for leaks, and fix any issues found. They will also make sure that the occupants of the house are aware of and follow the fire evacuation procedure in the event of an accident.

Adjusting the Damper

A damper regulates how much heat is lost to the chimney when you're not using your stove. It can also be used to regulate the fire. If the flue opens but the damper is closed, the fire will not burn properly and smoke will erupt into your home. You can adjust your damper to ensure the best flames by experimenting with different locations.

It is important to keep your damper open to let air enter and exit the flue when a flame is burning. This allows the fire to get a good fire going and also helps keep it in good shape so that you can enjoy it for a long time. The proper opening will stop the fire from being starved of air and keep it from blowing smoke.

In order to properly adjust your damper, you have to first ensure that the fireplace is heated and the wood stove is warm. This will ensure that the chimney stays warm and has a good draft. Once these are done the wood stove damper can be adjusted.

Once the fire has smolder for a while, you can shut the damper down to about three-quarters of its original position. This will stop the warm air from the room from escaping into the chimney, while still permitting smoke to escape.

This is the best method to stop the fire from getting too hot, while also keeping it burning. If you shut the damper too far it could stop the draft from working, however should it be too wide, a cold breeze could blow into your home.

Placing your hand on the top of the flue pipe will inform you how much the damper has sunk. If you feel a small woodburners draft pushing against your hand, it is probably in the open position.

The damper setting can vary a little from one stove to the next, and even between different types of wood. Experimenting with the various settings will give you an idea of what to look for, but you may need to tweak until you get the perfect setting for your stove.

Clean up

It is important to clean your flue and stove after an incident. This will reduce the risk of a fire in the chimney, which is the primary cause of fires caused by wood stoves. Creosote, a sticky substance that accumulates on the stovepipe's interior and can be very dangerous. It is caused by moisture and unburned wood particles that are unable to escape the fire. This can also occur when fires are not lit properly.

Regular cleaning helps to prevent creosote buildup. This can be done by sweeping your chimney at least once every year. It is recommended that you have your fireplace and stove professionally cleaned and inspected at least once per year, too.

Also, it's a good idea for you to clean the ash tray and the grates regularly. It is a good idea to use only wood that is seasoned to burn, since this will result in less creosote and ash. It is also an excellent idea to avoid burning cardboard, paper, plastic and other trash items. These items could release dangerous chemicals to the air and flue which can be released into your home.

It is also necessary to clean the glass of the wood burning stove on a regular basis. The majority of modern wood stoves have self-cleaning windows, which means they don't require as much scrubs. You can use stove glass cleaners on the window if you're capable of getting the glass as clean as you would like on your wood stove.

Other tips to maintain your wood stove include turning the vent down when you're not using it, and opening windows or doors to increase air flow. This will keep the fire burning longer and more efficiently since it won't need to exert as much effort to circulate the air. It is advisable not to stack logs, or let them sit on the fire for an extended duration. This could cause splits and warping. It is recommended to avoid using combustible compressed wood in your wood stove because the paraffin that is contained in the outdoor wood fire stove Wood Burning Cookers - Http://Sk.Nfe.Go.Th/Hatyai06/Index.Php?Name=Webboard&File=Read&Id=47155, can melt and then flow into the flue and cause damage.