• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace double glazing door handles Handles

The door handles of your home are an important part of the decor. A new handle can bring your home's decor up-to-date.

Over time your knobs for your doors can begin to feel stiff and even break. These are signs that it's time to replace them. This guide will help you choose the best door handle replacement upvc window handles for your home.

Door Knobs

Door handles can enhance the look of your home, while making it easier for people to open and shut doors. They come in a wide variety of finishes, colors and types to match your decor. If yours have started to show signs of wear or requires an upgrade You can replace them in a couple of easy steps.

You must locate the spindle, or shaft, through which the knob is attached to the door. Some have a small hole that you can insert the screwdriver with a small diameter to release the set screws holding the knob in place. Some have a small slot or hole in which can be used with a flathead screwdriver to push on a spring-activated nut, known as a detent. When you press the pin it opens the latch mechanism and allows you to pull or push the knob.

After you have gained access to the spindle or shaft, take off the door knob and replace it with the new one. Make sure you align it correctly and verify that the latch works correctly before tightening the new set screws.

After you've replaced the knob, place the latch rod in position over the hole in the door and lock it in place with the rod mechanism on the second knob. Ensure that the holes are aligned then tighten the screws on the latch plate.

Some people choose a brushed or smooth metal finish for their door hardware to give their home a sleek and contemporary appearance. This will match the furniture they have. Others prefer a more rustic style that is a good match for farmhouse-styled spaces. If you have members of your household who have mobility issues You may think about an rim lock or a lever style door knob, which require less pressure to operate.

Other factors are being considered more and more for the design of door double glazed windows handles. Accessibility and control of infections have been key issues in the creation of new handle designs. For example, some can be operated using an arm.

Latch

The latch that keeps your door handle open can wear out from the wear and tear of use. The Replacement Door Handles of the latch to fit a new handle can be a simple DIY job and it will make a huge difference in how your door opens and closes.

Depending on the kind of knob you are using depending on the type of handle you have, the latch may be part of the knob itself or it could be an individual piece that is attached to the door. In any case, you'll follow the same procedure to remove and replace. It's simple to take off the old latch, especially in the case of an entry handle that has a "magic" button. The tiny pressure-slot, which is located on the side knob, is what you will have to press to pull the latch out of the handle.

If your handle does not have this magic button you will need to remove the cover plates placed over the latch plate. These are usually rectangular or circular and can be removed by using a screwdriver to pull them off the handle. Some have a small slot in them where you can put your screwdriver through, while others simply snap off.

Then, remove the machine screws that secure the latch and the plate to the door handle. You'll need to keep these shorter screws with an angled tip in a secure location to be able to reuse them later. After these screws are removed you can remove the latch plate and mechanism out of the door's hole and set it aside.

You can now begin working on the new latch. Place the latch plate in the door hole and secure it with the hardware supplied. Make sure that the square pin that is on the interior of the latch is facing the latching mechanism inside the handle, and that it lines up with the other screw chambers of the door handle. Then, secure the exterior latch plate using the screws supplied.

Strike Plate

It is common to replace a door handle because it feels loose, or isn't locking properly. This is usually caused by misaligned parts in the latching system, such as the strike plate being too short or has moved up or down on the doorjamb as time passes. This easy project allows you to replace your existing strike plate with a longer, new one that will give you better security and will keep your door shut.

To check if the problem is due to the strike plate, apply lipstick or similar marking material to the bolt that is used to latch. Close the door, and then try to latch it. If the mark is located below the strike plate's hole, this means that your door isn't latching because the plate is too short. If the mark is higher or below the strikeplate hole the strikeplate may have been moved up or downward on the doorjamb.

You may be able simply to install the new strikeplate in the one you have already installed using the screws that come with it, depending on your door. However, you may need to pre-drill holes and then chisel out some of the wood to make sure it's snugly fitted. If this is the situation make sure you don't chisel out too much wood or you may ruin the integrity of the doorjamb.

Installing a new style box strike plate will provide the lock with a stronger grip on doors and require more force to open them. It usually requires two longer screws to secure the strike plate into the frame of the door. It is necessary remove the previous strike plate before drilling and chiseling the wood to make room for the new one.

This strike plate is made to work with antique rim locks, and it's made from sturdy solid brass in an extremely thick. It comes with machine screws and wood screws, ensuring that you have the right equipment for your task. Be aware that the wood screws have a sharp edge, whereas the machine ones are more blunt.