• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have a unique procedure to add the second key. It requires dealer support using a handheld computer dubbed Tech-2. Then a new key and transponder are required to be purchased and programmed to the car.

Change your keys regularly to prevent one from wearing out more than the next. This will help keep your keys in pristine condition.

Replacement Case

As opposed to the traditional saab 9-5 key replacement keys of the past keys, the latest key fobs have electronics inside which makes it hard to make a copy. This has made theft of cars considerably more difficult than it was years ago. It has also made it more expensive to replace lost keys.

Every owner of a 9-3 Saab should have at minimum two working keys. If one gets lost, it costs a lot of money to replace it in the car, as it requires replacing the CIM module and re-programming the locking cylinders. Dealers charge between $100-$200 for this.

There are a few ways to avoid these high cost. Some parts retailers will search for the code on an extra key (usually the same one that opens the doors and turns the ignition) and cut a brand new metal key blade for a fraction of the dealer's cost. The key must, however, be the same as the original one to function properly in your vehicle.

You can also change the case yourself by following these steps. You'll need a flathead screwdriver and some patience. With the screwdriver you can pull apart the plastic and remove the emergency key. Once you have the case opened, take out the electronics and put them back into the new case. Make sure to insert the correct key and badge back into the case as well.

Replacement Battery

The replacement battery for the Saab 9-3 is a low-cost component that can be replaced easily and quickly. This DIY video from YouTube user Cyclone Cyd explains how to replace the battery of the remote key fob in only four steps. This tutorial can be used with any modern Saab key fob. However, the procedure might differ slightly.

This button is usually placed next to the Saab logo on the back of the fob. This button is usually located just below the Saab logo on the back of the fob. Use a flathead to insert the screwdriver through the small hole on this button. This will allow you to open the case of the fob to allow you to replace the battery.

Once you have installed the CR1632 batteries, you can reassemble the remote key fob. You can then program it into your car. The procedure should take no more than an hour at most. It is a very simple process that does not require any special tools.

The process is a bit more complicated if you lose your key, but it is possible. The dealer will need to read the car's VIN and then order a new key blade and TWICE module that has the correct unique code. After that, they'll be required to cut the replacement key and then program it with an innovative software tool called MDI.

Replacement Key Fob

The key fob comes with a battery that is used to lock and unlock your car. The batteries have a lifespan, and they will eventually expire. This is a typical issue that happens with all cars, and the good news is that you can change the batteries on most fobs, without replacing the entire case. You can purchase fobs replacements on Amazon that come with all the electronic components already in place, so you'll simply open the case and replace the old batteries. It is important to note that you'll need take out the emergency key first. you can do this by inserting the screwdriver of a small flathead into the slot that is located in the middle of the case. Use the screwdriver to move around the case, and it should split open, making it much easier to take it out.

If you're planning to replace your keys, keep an extra set on hand. This will save you a significant amount of money. If you have a spare, you can request that the dealer cut an additional key and program it to your car, which is cheaper than replacing the whole key fob.

If you don't have a spare car key, you can add a second key to your car, but it requires a lot of research and effort. It costs around a hundred dollars to add a second car key. The computer of the car must also be programmed. This can be done by a professional, however it's a costly option for most owners.

Replacement Ignition

Contrary to earlier Saab automobiles, the new saab key programming Key Battery replacement; sciencewiki.Science, 9-3 models use a much more sophisticated alarm system that is built around a coded key. If you lose only one key, it can be expensive to add another one because the car must have a specific computer installed and be programmed to accept a new key. Even dealers can charge hundreds of dollars to program the new key if they are unable to complete the task.

If you've lost your sole working key, a dealer will repair your car's computer (known as the CIM or saab key programmer TWICE) in order to make an exchange, and they will charge you a premium price for it. We can reprogram the current EEPROM inside your car's computer so that it's ready for an extra key. This will save you more than 50% on the cost you pay the dealer.

If you've been an owner of an 03-11 SAAB 9-3, you likely realize that the ignition key isn't very robust. They can be extremely sticky and the buttons can be removed from them at times which is why you should think about purchasing a new one if yours isn't performing as it should. Luckily, replacing the ignition key isn't as difficult as it sounds, and it is fairly easy to do using the appropriate tools.