• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Sash Repairs

Window sashes need to be inspected regularly for signs of mold, mildew, and damage. You can reduce the cost of repairs in the future by catching these issues early on, before they become out of control.

The sash is the interior frame that is vertically moved upwards or downwards in windows that open. This article will teach you how to perform simple repairs to sash.

Weather Stripping

Wood window sashes give a classic aesthetic to your home and, when properly maintained, they can last for a long time. They may, however, be damaged or degraded over time, due to exposure and normal wear and tear. Sash repair experts can restore windows to their original condition and maintain their beauty much longer than replacement windows.

The first step for sash window repairs is addressing weather stripping, which can be found on both the sash as well as the frame. It can cause drafts if it's worn or loose. Start by identifying the brand of window and the manufacturer's date (etched on the corner of the glass or on the aluminum spacers between panes). Then, remove the sash and mark its width and height so that you can locate new weather stripping that matches.

Then, you can remove the sash from the holder and place it on an even surface that allows you to see all four sides. If your sash has been double-hung, take out the weights using their ropes that should fall into the pocket within the jamb lining. Once you've removed the sash using a utility knife, you can use it to cut off the weather stripping from the corners, then remove it manually or using a putty knife.

After the sash has been cleared, you can install parting stops. These are long pieces wood that separate the two sashes. Pam likes to replace these with standard 1/2-inch-by 3/4-inch Window Repair trim from the lumberyard, but you can also replace them with a piece of scrap wood.

After removing the parting stops and trimming them to your desired length, apply a thin layer of glazing compound on the bottom of the sash. Smooth it out using your putty knife and let it dry for at least a day. After the putty has completely cure it is possible to apply an acrylic latex topcoat. This will protect the putty and give your sash a fresh appearance.

Sash Hardware

The hardware that supports the window sashes can wear out over time and use. This could result in windows or doors that is difficult to open or close. It's good to know that replacing or fixing this hardware is usually easy and affordable. If a sash becomes difficult to operate you can try spraying some oil into the jamb channel, and then slide it open to see if this solves the issue. If not, the issue is most likely due to the balance of the sash and you'll need to take out the sash to access the hardware.

Window sashes should be able to open and close with minimal effort. However, this may be difficult if weights are worn out or the sash-to rail connecting rail isn't covered with. This issue could be caused by a number of factors, including the lack of maintenance or the wrong weight rating for a particular sash.

If the hinges on the window begin to move, this could cause the sash to drag, and window repair then eventually to hit the frame at the opposite corner (Photo 1). To address this problem, first ensure that the sash fits squarely in the opening of the frame and then take it out of the window. If the sash is secured to the hinge arm, you'll have to unscrew the hinge arm and replace it (Photo 2). Install the new sash (Photo 3).

Old windows, especially those in older houses, can be difficult to close and open due to sagging hinges and a general lack of energy efficiency. In most cases, a few simple repairs can transform these windows into smooth operators and save homeowners money on energy bills.

In order to make these repairs to sash, it's important to have all of the necessary tools in place before you begin. Mark the hinge channel's location on the frame (Photo 1) with pencil. This will make it easier to place the channel in the correct location after you've completed. Remove the sash and then remove all hardware including the parting beads cords, chains, and cords that help to hold the sash. Soften any hardened putty with an electric heat gun set to medium and fitted with a shield for the nozzle. Take off the old sash and store it in a bag with a label.

Sash Weights

Sash weights can be replaced to improve the performance of your window sash and reduce the cost of energy. Sash weights are made of iron or lead cylinders that are encased inside a concealed cavity, and connected by ropes to the movable window sash. These weights provide counterbalance which allows the window to be shut and opened without using mechanical or electrical devices. When they fail, sashweights tend to be neglected or not used by homeowners.

A weight from a sash that fell out of the cavity is difficult to get back It is therefore important to find a replacement that fits properly. You will also require a fresh piece of string, a length of sashcord and a few sashpulleys to secure the weights you are replacing to the cord.

Mortise and Tenon joints can be used to join old wood windows. Hammers and pins can be used to take out the wood pegs holding the parts together. The majority of these pegs are big on one side and smaller on the other. It is crucial to remove first the smaller diameter sides. Later sashes made use of glue instead of pins. They can be separated by using a knife and a mallet.

After the sash is released, you can remove the stops on the sash and get access to the weight pockets. This is usually done via an opening in the bottom of each jamb. The hole is then covered with an access panel made of wood which can be removed to let you view the inside of the frame.

After the sash has been stopped and the access panel removed, you will be able to remove the weight from the sash and replace it with new. Weigh the sash first because the weights you have might not be the right size. Once the new weight is in place then tie a string to it and thread it through the sash pulley. Then, you can attach the string to your boxed frame. Leave a few inches at the top of the string to allow future adjustments.

Sash Cords

The majority of double glazed window repairs near me-hung windows with a history have a cord or chain connected to the weights that supports and keeps the sashes in balance within the jamb. Over time, these cords could break, making it difficult to raise the window. A new sash cord will restore the ability to move the sash upwards and downwards and keep it in place when it is opened.

The first step in replacing cords for sash is to locate and remove the access panels in the jambs. They are usually screwed or nailed in and require removal. It is possible to remove them using an axe or hammer, however, it is best to lay out dust sheets prior to starting any work.

Once the access panel is removed, you can begin working on the sash. Use a flat bar or chisel to pull the narrow partsing beads out of their grooves. It's important to be patient, as these are often stuck or nailed to the floor. If the sash is still in place, break the mortise-and-tenon joints out with a hammer or screwdriver and then remove each wood peg. It should now be possible to move the sash back and forth freely, although it may require oiling if it seems stiff.

Determine the length of sash chain/sash cord needed to reach the sash slot on the bottom from the pulley at the top of the jamb. Cut the cord/chain, and then fix it using the step 6 above. You can use a hammer and nail or screws, but nails are less likely to cause damage.

Unless you've bought an item that replaces the old counterbalance system it's best to keep the original weights for balancing in place. They are not expensive and simple to install if you buy them at architectural salvage stores. Depending on the size of your window, two or three sash weights could be needed to keep it open.