• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

Depending on how old your subaru smart key is, you may need to have your key fob programmed by an auto locksmith. This is usually accomplished through the connection of a programming machine to the car's computer.

To program your subaru keys lost to program, open the driver's door by pressing the door button. Then close it. You will hear the chime and see the dome lights flash on the instrument panel.

Step 1: Locate the circuit board on your transmitter

There are a variety of ways to program your key fob. It is first necessary to identify the kind of key fob you own. You can do this by looking at the shape of the key fob or by listening to your car's sound.

Once you have the information then you can begin the process of programming your keyfob from home. To accomplish this, you'll require a metal key and a flathead screwdriver. You can open the key fob by twisting. Push the metal key into the case. Then let go of the battery by pressing the tabs that hold it in place. Replace the battery and put the case back together.

Step 2: Remove the key fob case

It is recommended to replace the battery of key fobs if they are not working. In some cases, the buttons on the key fob may be damaged. If you are able to see that the buttons' contacts made of metal have been damaged, you can try applying solder back to them in order to make them function again.

Before you begin the process, ensure that the doors of your car are shut and the ignition is turned off. You can do this by closing your driver's door and pressing your door button ten times in quick sequence. Then, you should hear the instrument panel chime, and the dome lights will light up. This means that you are in a position to proceed.

Step 3: Put the Key Fob in the Ignition

There are many articles online that give you steps on how to program a new or replacement Subaru key fob at home, however most of them are not very specific. Programming an electronic key is best handled by a professional auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat of your subaru forester replacement Key Fob with the engine off and the doors shut. Open the door button control and use it to unlock all doors. Open and close the driver's door three times. Remove and insert the ignition key (don't turn it) 10 times over 40 seconds. The system should sound chirps to confirm that the settings have been changed.

Step 4: Turn on the ignition

It is crucial to understand that this method of programming a key fob works if you already have a working key. If not then a dealer or auto-locksmith will have to program the key fob for your Subaru Fort Bliss.

Once your key is programmed and you are able to start your car within five seconds. To begin, ensure that all doors are closed and the engine is turned off. Then, sit in your driver's seat and unlock all doors with the door button control. Put the key into the ignition and turn it to its first position. The electrical systems will be activated however, the engine will remain off. Repeat this process ten times.

Step 5: Unlock the Driver's Door

Subaru provides a variety of luxury cars that come with key fobs that lock and unlock the doors, start the car, and defrost the windows. However, there are times when these devices fail to function properly.

To resolve the issue to fix it, you must contact a locksmith or a dealer. This will solve the issue and make sure that your vehicle is secure.

To accomplish this, you need to open the door to the driver's side and close it. Put the key in the ignition and then turn it to position 1. Then, turn it back to the off position. Repeat this 10 times in one row as fast as you can. After the tenth repetition you will hear a chime.

Step 6 Step 6: Press the Lock/Unlock button on the Driver's Door

If you're looking to replace the battery on the subaru car key replacement cost key fob, the process is simple. Open the exterior fob case. Utilize a flathead tool to pry the case's interior open and remove the old batteries.

After you have removed the old battery, insert the new one and close the case. Sit in the driver's seat and unlock all doors using the door button control. Finally, insert the key in the ignition and turn it so that the electrical systems are on but the engine is off. Repeat this 10 times in a line until you hear a chime from the instrument panel. This puts the system into programming mode.

Step 7: Press the Lock/Unlock Button on the Passenger's Door

The irritating chirp that can be heard when locking or unlocking a Subaru Key Fob from outside of the vehicle is distracting for some owners. In some instances the chirp could be removed by opening and closing the doors as well as a double-click of the lock button on the key fob.

Close all doors including the fuel-filler lid and turn off the ignition. For 10 seconds pressing and holding the lock button on the key fob. The instrument panel emits a sound when this is done. The chime signals that the lid of the fuel filler and door are locked. The setting can also be altered so that the lids and doors are locked automatically, without pressing the request switch.

Step 8 Step 8: Enter your Transmitter's 8-digit Number

Note down the first series of 8-digits, and keep it in a safe place. Now, get in your driver's seat. Close all of the doors, and turn the key to the first position (towards on). After 10 turns, the instrument panel should chime for a single time.

Next, open the case for the key fob and look for the circuit board of the transmitter inside. There are usually two or three sets of numbers (8-digits) on the circuit board. Follow the directions in the guide to register the code. This may require visiting the dealer for older models.