• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will protect your prized property from theft. It is discreet and does not require any additional key fobs.

The device uses buttons on your vehicle (steering wheels doors, door panels, and the centre console) to generate a unique pin code sequence that can be changed up to 20 times. This will then allow the start-up of your vehicle.

Simple process to change the PIN code

With the rising rate of vehicle theft, many owners are seeking to improve their security. There are many different types of aftermarket security devices that range from tracking systems to alarms and immobilisers. However they do not all are equally efficient in protecting your vehicle. A tracking device can assist you in locating your car if it is stolen however it cannot stop the crime. An immobiliser, on contrary does exactly what it says on the label: it shuts off the engine of your vehicle so that it cannot be started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it virtually impossible for thieves to steal your vehicle.

The ghost device uses the buttons on your car to generate a unique sequence which must be entered in order for the engine to begin. This can be done using the heater, window or indicator stalk buttons. In addition to this, there is also an app on mobile that can act as an emergency PIN code bypass and allow the driver to operate the car without using the button sequence. This is an excellent option when you wish to donate your car to valet parking or for servicing. The immobiliser remains in operation.

The Ghost is a truly unique and innovative device that works in conjunction with the buttons on your vehicle instead of being a separate unit. This means it's not just a powerful security measure against theft from your vehicle but it can also be transferred to any future vehicles you may own, making it much more investment-wise than the traditional lock on your steering wheel.

Weatherproof small device

The Autowatch ghost immobiliser is an advanced security system that guards your vehicle from key cloning, hacking and ECU swapping. It is a tiny, weatherproof device that communicates with the ECU of your vehicle directly via the CAN bus, causing it to shut down the motor. It can be installed in the vehicle without the need for extra wiring, nlifelab.org and has been thoroughly tested to make sure it is compatible with all vehicles. It also is resistant to jamming devices which is an approach used frequently by thieves to bypass existing immobilisers.

The benefit of CAN data over conventional systems is that they operate silently. It's not detected by sophisticated RF scanning or code-grabbing technology and is also unrecognizable by conventional diagnostic tools. The Autowatch ghost doesn't emit LEDs, but instead utilizes the buttons in your vehicle such as steering wheel, centre console or door panels to create a unique, changeable disarm sequence. You can create a sequence that is as long as 20 presses to provide additional security. The iPhone app lets you make only one, authenticated connection using a pairing code that is unique to the Ghost and communication between the two is secured.

The Ghost also prevents thieves from stealing an additional key or replacing the ECU to bypass the immobiliser to start the engine. The engine will only start when a valid PIN code is entered. It can also be put into valet/service mode for a temporary operation (with defined parameters like a 30mph speed limit) so that you can give your car to a valet service for servicing without the need to enter a pin code.

Every vehicle is tested

The Autowatch Ghost is a first-of-its-kind aftermarket immobiliser CANbus. It can be connected to the vehicle's wiring and also to the engine control unit (ECU). The device detects signals to prevent your car from operating normally until you enter a custom code. The system can be turned on or off via your smartphone's app, without the need for extra wires.

The factory-installed immobilisers function by using a transponder that is embedded in the key. This sends a message to the ECU. The car will start when the correct code is transmitted. However, if the transponder from a different vehicle is used instead, the immobiliser won't recognise it. This enables the vehicle to be stolen and started. The Ghost immobiliser was created by a South African company at the forefront of vehicle security systems technology. It protects you from hacking or key cloning, and even key theft. The only way a thief could take your car is physically towing it away, and even then they wouldn't be able to drive it.

ghost immobilisers makes use of buttons on your vehicle, like the indicator stalk, the steering wheel, and doors, to generate an individual PIN code which must be entered in order to use your car. This is done without the need for extra hardware such as a key-fob and can last up to 20 presses long. It is also inaccessible to diagnostics equipment and does not transmit radio frequency signals so thieves cannot make use of sophisticated RF scanning or code grabbing techniques to determine if a security system has been installed.

Unlike physical anti-theft devices like clamps or wheel locks Ghost is hidden within the vehicle, so it cannot be disabled or removed by thieves and is even more difficult to get rid of than a car alarm that requires disarming with a button sequence. This makes it a great complement to a GPS tracking device, which can be used to track your vehicle after it's stolen.

Emergency PIN code override

You don't have to look very long on social media sites to find stories or videos about cars that have been stolen with the latest technology tools. This includes key-cloning devices and hacking devices that allow you to start your car without the original keys.

Our Ghost immobiliser combats this and provides you with an additional layer of security to stop your vehicle from being stolen when it is targeted by thieves. It is created by creating an individual pin code push sequence using your buttons on the steering wheel, door panel, and the centre console. This unique PIN is entered in conjunction with your original key fob to stop the engine from starting. The unique override pin is on the black card that you will receive after installation and is easy to remember because there are no LED indicators.

The device is hidden inside the vehicle's wires and doesn't emit any radio signals, which means it can't be detected by modern criminals with diagnostic software that can recognise what type of security system you have installed. This makes it a great alternative to an alarm.

Unlike most other security systems, which have a relay inside the engine bay these CANBUS Immobilisers communicate with the vehicle's ECU and BCM via CAN data bus (brand dependant). This allows them to disable the vehicle completely with a digital block of commands to both the ECU and the engine.

It is also possible to connect a separate analogue immobiliser, alarm or tracker with these systems but this must be specified prior to installing the device. They also work with valet and service modes, and are is a great alternative to a tracking device if you take your car to the dealer for repairs to an electrical problem.

Service/Valet Mode

In recent times, there has been a rise in the number of vehicles stolen without the owner's keys. It's now easier than ever to take your joy and pride thanks to the availability of key cloning devices and door lock picks. To stop this, we are now offering the Autowatch Ghost immobiliser that prevents your vehicle from being driven even if your keys have been copied or your car has been stolen.

It directly communicates with your cars ECU (Engine Control Unit) through the CAN data circuit. It's completely silent since it doesn't use radio frequencies or keys fobs. It isn't detected by diagnostics or any other hacking device. It also protects against adding the key to a new one or replacing the ECU to bypass the system as only the correct PIN code can allow the engine to start.

The device is concealed inside your car by using buttons on the steering wheel, centre console & door panels. Before you can begin your vehicle, you must enter a unique and reversible PIN number that is up to 20 digits.

This is the first aftermarket CAN bus immobiliser to be created that will stop your car being started or driven away if a PIN code isn't entered first. If the device is armed and you try to drive away, it will display an indication on your dash that will flash continuously for about 300m. If you type in your PIN code at this point it will deactivate the anti-hijack system and your vehicle will continue to drive as normal. If you do not enter your PIN in this moment, the indicator will continue to flash and require a new PIN each time you attempt to start your vehicle.