• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser 2

Protects your vehicle against key cloning and stops thieves from driving your vehicle with original keys. Our most recent immobiliser connects to your vehicle's data network, CAN, and a unique PIN code must be entered for the engine to begin.

Ghost, unlike trackers, doesn't emit radio frequency signals and can't be identified by diagnostic tools. It does not have any LED indicators or buttons that could signal its presence in your car or van.

Anti-key Cloning

The ghost immobiliser (https://cs.xuxingdianzikeji.com/home.php?mod=space&uid=757170&do=profile&from=space) was created to fight key hacking and cloning. This device is connected to your vehicle's data network CAN, and creates a unique pin code by using the factory buttons on your dashboard and steering. This stops the thief from being able to start your car. If the incorrect PIN is entered it will stop your engine from starting and making it impossible to drive off with joy and pride.

A ghost immobiliser cost immobiliser is a new technology that is extremely difficult for thieves to beat. Unlike physical deterrents like wheel locks and steering locks that can be cut off or taken the ghost immobiliser is an invisible electronic device that isn't easily detected by regular thieves because it doesn't emit radio signals and operates in a silent manner.

The next generation of immobilisers are capable of protecting your vehicle from a range of threats, including key-hacking, cloned keys and relay attacks. It also stops the thief from adding a key or replacing your ECU because it won't permit them to start the vehicle without entering the correct PIN.

Contrary to other immobilisers, the ghost immobiliser 2 does not require a remote or key fobs for operation. It can be deactivated by the driver's smartphone with a simple application. This is a great option when you have to hand your car to valet parking, or maintenance without keys.

The Autowatch Ghost-II is the latest evolution of our ground-breaking ghost immobiliser. It was designed to be as simple and easy to use as is possible, yet remains as secure as ever. This is achieved by connecting the Ghost-II with the vehicle's CAN data network, which means there aren't any wires that are able to be hidden or easily discovered. It also comes with a built-in feature that allows you to disable your Ghost-II by connecting it to the vehicle's Bluetooth which means you can go out and drive without any hassle.

OBD port hacking

OBD port hacking is the most recent method employed by professional car thieves. Thieves can gain access to your vehicle's OBD by using an laptop, ghost immobiliser mobile application, and a few cables that can be bought on the internet for less than PS50. Once they have access, they will be able to do anything they want, from resetting your vehicle's fault codes, tuning your car, or getting it stolen in less than a minute.

If you have an Ghost immobiliser, it can protect your vehicle from theft using this method, by making sure that a unique PIN code sequence is entered alongside your key fob to start the engine and then drive away. It does this by communicating with the vehicles ECU (Engine Control Unit) via the CAN Data circuit and is totally undetectable to any code grabbing or RF scanning technology. It even includes a Service/Valet mode that will allow your vehicle to be started without the need for a PIN code.

You'll also require cables with OBD pins that connect to the CAN bus. These cables are available on eBay and Amazon for around P50. You'll also require a cable with OBD pins which are connected to the CAN bus, these are available on eBay and Amazon for about PS50. The cable must be spliced into the wiring harness of your car, like the radio wiring harness.

Once the hacker has a connection to your vehicle's OBD port, they are able to send diagnostics requests to the system at high baud rates which will crash the CAN and stop systems inside your car from functioning. This can cause your car's engine to stop or shut down.

No need for additional remotes or key fobs

The car immobiliser is a great piece of anti-theft technology that is utilized by millions of modern vehicles all over the world. Utilizing engine ECU software to stop cars from starting if a fake transponder signal is sent to it an aftermarket immobiliser can be an excellent way to safeguard your vehicle.

However, it can be easy for a thief to bypass an immobiliser system if they have access to the code that allows them to disable it. A burglar could easily take the battery off of most key fobs by prying them open. They could then use an instrument to remove the circuit board inside an immobiliser and replace it with a blank. They will then be able start your car.

With the TASSA approved Ghost 2 immobiliser, there are no remotes or keys to be purchased. The immobiliser connects directly to the vehicle's ECU (Engine Control Unit). This is done by a discrete and silent CAN data loop that is not detected by diagnostic tools, such as those used by high tech thieves. It does not also make use of a traditional key-fob that has LED indicators, so it is able to go unnoticed at sight.

There will be occasions where you have to disable Autowatch Ghost 2's automatic security, for example during a valet parking or service job. Ghost CAN immobilisers have a mode called "Service Mode,' which you can activate by just a click of a button on your phone. The car is still operated however, its maximum speed will be restricted to 36 mph for added security.

If you'd like to learn more about the TASSA certified ghost immobiliser, please contact us today to book a demonstration at our workshop. A member of the team will give you the entire process of how the system works and provide you with owner manuals, installation certification, Ghost 2 emergency card and security guarantee.

Simple change of PIN code

Ghost is the next-generation device that protects your car without cutting wires or installing aftermarket key fobs. It connects directly with the vehicle's CAN data network. A personal PIN can be programmed using buttons on the dash and steering wheel. The device does not emit RF signals, so it is unable to be manipulated. This makes it unrecognisable by sophisticated RF scanning or code grabbing technology that modern thieves employ.

The PIN code sequence can be changed anytime you want to block prior drivers, and it even has an override code in the event of forgotten sequences. During installation the installer will show how to do this. The system also includes the valet mode feature that can be used to temporarily disable the pin input sequence so that your garage or mechanic can repair the vehicle without needing to know the pin code. This is a great option for those who do not wish their pin sequence to be divulged, but want to leave their car with valet parking or service.

Ghost is a discrete system that uses the buttons on your car to create an individual and interchangeable PIN sequence. This sequence is entered using the app for smartphones, meaning there are no additional LEDs being thrown, and your vehicle is safe from the risk of being blocked by hackers or other technology.

Tested for each vehicle

Unlike key fobs that require you to press buttons on them, a ghost immobiliser is discretely placed under the dash or steering wheel to make sure you are unaware it's there. The device is connected to your car's CAN data networks and the personalised PIN code is programmed using existing buttons on your vehicle. The system then prevents the engine from starting until this code has been entered prior to. This means that thieves are unable to duplicate the keys of your car or access the OBD to hack into it.

Ghost is a feature that can be found in any vehicle, including electric cars, vans motorhomes and bikes. It's also extremely flexible and can be programmed to deactivate in various scenarios. It is possible to program it to enter Valet mode, for instance when the vehicle is transferred to a valet service or parking company. This means that your car can be operated within a set 30mph speed limit, and the ghost immobiliser will activate itself when it returns to your possession.

Another excellent feature is that the device can be reset to your personalised PIN at any time. This is great if you lose the code, or when the device ceases to function.

The device is also completely unnoticed by anyone who doesn't know about it is. It does this by analyzing the buttons on your steering wheel and dashboard, and using the data it sends to identify which button was activated. This makes it a secure and reliable security system that can't be tampered with by jamming, RF scanning, or door lock pick sets.