• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they do not corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and may even be fatal. It is essential to make sure that your windows are in good shape.

For single pane windows, it is fairly easy to replace them, and the replacement is usually able to fit into the frame that was previously installed easily. However If windows with double panes are anchored by internal beading, it will be more difficult to remove the old panes and put in new ones. In this instance you'll need to find some plastic spacers that will aid the new pane in being able to fit correctly into the frame of the window.

If you are going to attempt to remove the glass panes yourself it is important to wear the proper safety gear such as gloves that are thick and protective eyewear. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards fall on the fabric and not on the floor which could cause them to be trampled.

It's a great idea tape the gap once the glass is removed. This will stop drafts and water from entering your home until a professional comes out to fix the window. This will also act as a barrier, deterring any intruders to gain access to your home. If the gap between the window and the door is substantial, you may need to consider an alarm system that has a window. This will provide the best of both.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. In time, they could develop a variety of issues, including sagging. A window that is sagging can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from getting worse.

Repositioning the hinges can aid in fixing a window which is sagging. To accomplish this, you'll need to open the window so that you can get to the frame. You can then unscrew both the hinges at the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. After you've repositioned the hinges, close your window repair and test it for fitting. If you're happy with the fit, tighten the screws until they remain in position.

If you are unable to reposition the hinges, you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to loosen. If this happens, it's essential to replace the seal as fast as you can to ensure that your uPVC windows are watertight and draught-proof.

upvc window repair near me handles may also loosen up. The majority of the time it is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's relatively simple to fix a loose uPVC handle. You'll first need to close the window and then perform a test fitting. The corner joints of the sash need to be aligned with the casing joint. If it isn't you can use a screwdriver to loosen the handle. Then, turn the mechanism back into place.

3. Water Leaks

It is important to act if you awake each day to find mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and affect your ability to regulate the temperature of your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on how serious the problem is, the old caulking may need to be removed. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk and then make the area harder to clean and could decrease the efficiency of your energy usage.

It is important to check that the drainage holes are clear of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious instances, you may need to replace the window.

Mold spots and rotten sills are another sign of water leakage. This is a fungus that thrives in damp conditions and can quickly spread across the house.

It is also important to note that if the leak is coming from between the glass of your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sliding. This can be easily repaired by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and open with a breeze it could be hinges at fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that are hinged and like any mechanical part they are susceptible to wear and tear over time. The process of replacing a hinge on a window is an easy process, but it's simpler when you have a person to help hold the frame up.

Verify that the uPVC hinges open and close in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The issue can be caused either due to opening the window in the wrong way or by a poor installation at the factory. Sending us a photo through our website can often solve the issue. We are always happy to provide assistance.

Regularly lubricating the hinges is also necessary. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window operate and close more smoothly. It can also prevent corrosion and decrease the chance of sticking. The ideal time to do this at least once a year. WD40 or other solvent-based oils should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. The hinges can also become misaligned due to wear, creating a gap where the sash meets frame. If they're beyond repair, it may be necessary to get them re-aligned. In addition, the interlock could be unbalanced. It is located on the hinge's side, and might require to be cleaned. In certain instances it is possible to replace these.

The seals may wear out or be damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to prevent draughts. Another option is to replace the upvc window with low-emissivity glass, this will help to regulate indoor temperatures and again will reduce the possibility of draughts.

Another, and most effective ways to cut down on the draughts in your home is to use a draught excluder, these are usually fabric tubes which are filled with a kind of filler. They can be positioned on top of your windowsill. They can help block out cold air and keep your home warm and cozy!

With a bit of regular maintenance and repair your windows made of upvc will continue to provide an excellent level of insulation and security for your home. It is important to remember that all windows eventually become worn out, and it could be cheaper to replace them rather than repair them. If you encounter any issues with your window made of upvc it is recommended to speak with an expert immediately.