• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they don't corrosion or rot.

It is crucial to wash and oil UPVC windows and doors regularly. This will help prevent costly repairs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and may even be fatal. It is important to take the time to make sure that you're doing everything you can to ensure that your windows are in good shape.

Single-pane windows are fairly simple to replace and typically fit into frames of the past easily. However when you have double pane windows that are anchored by internal beading, it'll be more difficult to get rid of the panes that are in place and replace them with new ones. In this instance, it is necessary to buy plastic spacers to aid in fitting the new pane into the window repairs frame.

Wearing protective eyewear and thick gloves is essential if you plan to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth before you start working on the glass, so that any shards fall onto the cloth rather than on the floor where they could be trampled on and cause further damage.

It's a good idea to cover the gap with tape after the glass has been removed. This will prevent water and drafts from entering your home until a professional comes out to fix the window. This will also provide an obstruction to prevent criminals from getting into your home. If the gap is large, you may be interested in a security door that has an integrated window, since it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. Over time, they can develop a number of problems that include sliding. A window that isn't properly aligned can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from worsening.

To fix a window that is sagging you can try to reposition the hinges. To accomplish this, you'll need open the window to get to the frame. After that, using the screwdriver, you'll be able to remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you have moved your hinges. If you're satisfied with the size of the window, you can tighten screws to keep them in the right position.

If you are unable to move the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. It is important to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen up. This is often caused by screws that have been removed over time, but it can be due to the mechanism of the handle wearing out. It's relatively easy to fix a loose uPVC hand. First, you'll need to close the window and then perform a test fitting. The corners of the sash need to align with the casing joint. If it doesn't you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains, it is important that you take action. Water leaks from windows are not just a cause for destruction of your home's structure but also hamper your efforts to regulate the temperature in your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix that can be completed by any DIY expert. Depending on the severity of the issue is, old caulking might need to be removed. It is essential to remember that when it is about uPVC window repairs you should avoid the temptation to "over-caulk in order to make the area harder to clean and can decrease the efficiency of your energy usage.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more extreme situations, you may have to replace the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to keep in mind that if the leak is coming from between the glass of your double glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and blow open in a breeze, it may be hinges at fault. They can be repaired by any skilled DIYer and can be done within a few minutes.

Like any mechanical component hinges are prone to be damaged over time. It is essentially a simple process, but it's easier to do when you have a person to help you hold the frame up.

Make sure that the uPVC hinges are closed and open in the proper direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a particular manner or because of poor installation at the factory. Sending us a picture via our website will often resolve the problem. We are more than happy to provide suggestions.

It is also crucial to lubricate the hinges regularly. Applying an engineering lubricant that is light to the hinges is a great method to accomplish this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. It is recommended to perform this every year. WD40 or other solvent-based oils should not be used as they can damage your upvc window repairs windows.

5. Draughts

Draughts in Upvc windows can be caused by a few various factors. Firstly the hinges, again because of wear and tear, may become displaced, which can cause gaps to develop between the sash and the frame. If they are damaged beyond repair, it could be necessary to have them realigned. Secondly the interlock, this is located on the hinge side of the window, can also become misaligned, again it may be possible to just give them a good clean, but in some instances it could be necessary to get them replaced.

The next common reason for draughts are the window seals. They are susceptible to being worn out or damaged over time, and will allow air to escape through the gaps. Replacing these with high-quality weatherstripping will help to prevent draughts. Replace the windows made of upvc with low-emissivity glass. This will help to regulate indoor temperatures and lessen draughts.

One of the most effective ways to cut down on the draughts in your home is to use a draught excluder. These are typically made of fabric which are filled with a kind of filler. They can be put on the windowsill on top. They can help stop cold air from entering and keep your home warm and cosy!

With a little regular maintenance and repair your windows made of upvc will continue to provide excellent security and insulation for your home. It is crucial to recognise that all windows have a life span and eventually, they will reach an point at which it is more economical to replace them than fix them. If you encounter any issues with your upvc window it is recommended to speak with a professional as soon as possible.