• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

ghost installer Immobiliser 2

Secures your vehicle from key cloning and prevents thieves from driving it using the original keys. Our latest immobiliser is connected to the CAN data network of your vehicle and a unique PIN must be entered to start the engine.

In contrast to trackers, Ghost doesn't transmit any radio frequency signals and can't be detected using diagnostics tools. It does not have any LED indicators or buttons to indicate its presence in your vehicle or van.

Anti-key cloning

The ghost immobiliser is designed to combat key cloning and hacking. The device connects to the CAN data network of your vehicle and generates a unique pin code sequence that is activated by pressing the buttons that are factory-installed on your dashboard and the steering wheel. This prevents the thief being able start your vehicle. If the wrong PIN is entered, it will stop the engine from starting, making it impossible for you to drive away with your pride and Joy.

A ghost immobiliser uses an innovative technology that is extremely difficult for thieves to beat. Contrary to physical deterrents, such as wheel locks and steering locks that can be cut off or jacked, the ghost immobiliser is an invisible electronic device that can't be detected by common thieves since it doesn't emit radio signals and works silently.

This next-generation immobiliser can protect your vehicle from a range of threats, including key hacking relay attacks, key hacking and duplicate copies. It is also able to stop the thief from adding a new key or replacing your ECU in the sense that it will not allow the car to start without entering the correct PIN number first.

The ghost immobiliser 2, unlike other immobilisers does not require an external remote or key fob to operate. It can be turned off through an app that is installed on the smartphone of the driver. This is ideal when you have to hand your car to valet parking or maintenance without key fobs.

The Autowatch Ghost-II is the latest version of our groundbreaking ghost immobiliser. It was designed to be as easy and user-friendly as possible, but remains as secure as ever. This is done by linking the Ghost-II into the vehicle's data network CAN, meaning that there are no wires to hide or be easily identified. It also features a built-in feature that allows you to disarm your Ghost-II by connecting to the vehicle's Bluetooth which means you can go out and drive hassle free.

OBD port hacking

OBD port hacking has become the most recent method employed by professional car thieves. Thieves are able to access your vehicle's OBD port with no more than an laptop, an app and a few cables that can be bought online for less than PS50. Once they have access, they are able to do whatever they want including resetting your vehicle's fault codes to tuning your car, or even getting it stolen within a matter of minutes.

If you have an Ghost immobiliser installed, it will prevent your car from being stolen with this method by making sure that a unique PIN sequence is entered on the fob of your key in order to start the engine and drive away. It communicates with the vehicle's ECU (Engine Control Unit) by using the CAN Data Circuit. It is not detected by any scanners for RF or code grabbing. It even has a Service/Valet mode which allows your vehicle to start without the need for a PIN.

You'll also require an OBD cable that has OBD pins that connect to the CAN bus. These cables can be found on eBay or Amazon for around PS50. You'll also require cables with OBD pins that connect to the CAN bus. These can be purchased on Amazon or Ebay for around PS50. The cable needs to be connected to the wiring harness of your car, for example the radio wiring harness.

Once the hacker has a connection to your vehicle's OBD port, they are able to send diagnostics requests to the system at a high baud rate which will crash the CAN and block systems in your car from working. This could cause the engine to stall or even lock doors, and even the brakes to be engaged.

No additional remotes or key fobs required

The car immobiliser is an excellent piece of anti-theft technology that is used by billions modern vehicles across the globe. An aftermarket immobiliser safeguards your vehicle through the use of engine ECU software that prevents cars from starting if the transponder is false.

It is possible for a criminal to have the code to disable an immobiliser, to disable it. A burglar can easily remove the battery from most key fobs by prying them open. They could then use an easy tool to take out the circuit board inside an immobiliser and replace it with a blank. They'll then be able to start your car.

The TASSA approved Ghost 2 is an immobiliser that does not require any additional keys or remotes. The immobiliser is directly connected to the vehicle's ECU (Engine Control Unit). This is accomplished by a discrete and silent data loop in CAN that cannot be detected by diagnostic tools such as the ones used by high-tech thieves. It does not have a traditional keyfob with LED indicators, which means it is invisible.

It is possible to disable autowatch ghost immobiliser's Ghost 2 auto protection at times like valet parking or a service. The ghost CAN immobiliser has a dedicated mode to do this, referred to 'Service Mode that is activated by the touch of the button on your phone. The car is still operated, but its maximum speed will be limited to 36mph for added security.

Contact us today to arrange a demonstration at our workshop. A member of our team will provide the entire process of the system's operation and provide you with owner's manuals, installation certificate, Ghost 2 emergency card and security assurance.

Simple PIN code Change Process

Ghost is the latest generation of device that locks your car without cutting wires or installing key fobs from an aftermarket. It connects directly to your vehicle's CAN data network and a personalised PIN code is programmed in it via buttons on your steering wheel & dash. The system blocks engine start and cannot be bypassed as there are no RF signals emitted from the device. This makes it undetectable by sophisticated scans using RF or code-grabbing techniques that modern thieves employ.

The PIN code sequence can be changed whenever you wish to block prior drivers, and it even has an override code in the event of a sequence that is not remembered. The installer will guide you through the process to do this during installation. The system also includes a valet mode feature which can be used to temporarily disable the pin input sequence to allow your mechanic or garage can repair the car without needing to know the code. This is ideal for those who want to hand over their car to valet parking or service, but still don't want to give away the PIN sequence.

In contrast to Thatcham products which require additional key fobs to operate, Ghost is a discreet system that uses the buttons inside your vehicle to create a unique interchangeable PIN code sequence. This sequence is entered through the smartphone application. No additional LED indicators are thrown, and your car is secured without possibility of being disabled.

Every vehicle is tested

Unlike key fobs that require you to press buttons on them the ghost immobiliser is discreetly installed under your dash or steering wheel so that you don't even know that it's there. The device is connected to your vehicle's CAN network, and a PIN code can be programmed using buttons on your vehicle. The system won't permit your car to start until this code is entered. This means that thieves are unable to copy the keys to your car or use the OBD to hack into it.

Ghost can be installed in all vehicles including electric cars, vans motorhomes and bikes. It is also extremely versatile and can be set to disable in various situations. It is possible to program it to enter Valet mode, for example when the vehicle is transported to a valet company or parking company. This means that your car can be operated within a set 30mph speed limit and the ghost immobiliser will activate itself when it is returned to your home.

Another excellent feature is that the device can be reset to your personal PIN code at any time. This is great in the event that you lose the code or when the device ceases to function.

It is also inaccessible to anyone who doesn't know about it is. This is due to it running through the buttons that are already on the dashboard of your car and on the steering wheel, and uses the data they send to recognise the buttons that have been pressed. This makes it a secure and reliable security system that cannot be tampered through RF scanning or jamming, or door lock pick set.