• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are long-lasting, durable and easy to maintain. They do not rot or rust like aluminum and timber.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will prevent unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and even be fatal. It is important to make sure that your windows are in good shape.

Single-pane windows are fairly simple to replace and will usually fit into the frames of the past easily. If you have double-paned windows that are joined by internal beading, it is harder to remove and replace the old panes. In this instance, it is necessary to purchase plastic spacers to make sure that the new pane fits into the window frame.

If you plan attempt to remove the window panes by yourself it is crucial to wear the appropriate safety equipment, including thick gloves and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not onto the floor and could be trampled under.

It's a great idea seal the gap after the glass has been removed. This will keep water and drafts from entering your home until a professional comes out to fix the window. This will also provide an obstruction to prevent intruders from getting into your home. If the distance between the window and the door is large, you might need to consider an alarm system that has an opening. This will provide the best of both.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. However, over time they may be afflicted by a variety of problems including sliding. A sagging uPVC window repairs near me can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from becoming worse.

To fix a sagging window you can try to reposition the hinges. To do this, you'll need open the window so that you can access the frame. After that, using the screwdriver, you'll be able to remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, shut your window and verify the an appropriate fit. If you are happy with the size of the window, you can tighten screws to keep them in the right position.

If you are unable to reposition the hinges, you may require replacing the seal. Rubber seals may dry out and lose their elasticity over time, leading them to loosen. It is essential to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.

Upvc window repair handles can also become loose. The majority of the time this is due to screws that have come loose over time. However, it can be due to the fact that the handle mechanism has been worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. First, you'll need close the window and then perform an experiment fit. The joints at the corners of the sash should be aligned with the joint on the casing. If it isn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

It is essential to take action if awake each day to find mouldy walls and wet floors. Leaks of water from windows can cause structural damage to your home and also affect your ability to regulate the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant around the frame has been damaged or missing.

This is an easy fix that can be done by any DIYer who has the ability. Depending on the severity of the issue is, the old caulking might need to be removed. It is important to keep in mind that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk' as this will only make the area more difficult to clean and reduce your energy efficiency.

Check that any drainage holes have no debris in them and that the sill pan has been properly angled to drain away from the window. In more serious cases you might have to consider replacing the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to keep in mind that if the leakage is coming from between the glass of your double-glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sliding. It is also possible to be fixed by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and open in a breeze, it may be hinges that are at the fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that use hinges and like any mechanical part they will wear out over time. It's easy to replace a hinge on a window however it is easier if someone else helps you hold the frame.

Make sure that the uPVC hinges are open and closed in the right direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The issue could be caused by opening the window incorrectly or due to a poor installation in the factory. Sending us a photo via our website will often solve the issue. We are more than happy to provide advice.

It is also important to ensure that the hinges are lubricated regularly. Applying an engineering lubricant that is light to the hinges is an ideal way to do this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also reduce the possibility of a window sticking and help prevent corrosion. This is recommended to be done at least once a year. WD40 and other solvent-based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different factors. Firstly the hinges, again due to wear and tear can become misaligned, this will cause a gap to form where the sash joins the frame. They can be fixed by giving them a thorough clean, however if they are beyond repair it could be necessary to get them re-aligned or replaced. Secondly the interlock, this is located on the hinge side of the window and can also become misaligned, again it is possible to give them a clean but in some cases it might be necessary to have these replaced.

These seals can wear down or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glass. This will help to regulate indoor temperatures, and reduce draughts.

Lastly, one of the most effective ways to cut down on the draughts in your home is to use an draught excluder. These are usually fabric tubes that are filled with some sort of filler and can be positioned on top of your windowsill. They can keep your home warm by blocking cold air.

Your upvc windows can continue to provide excellent insulation and security to your home with a little regular maintenance and repairs. It is important to remember that all windows eventually wear out and it may be more cost-effective to replace them rather than repair them. If you encounter any issues with your Upvc window, it's best to consult a professional immediately.