• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. They do not get rotten or rusty like timber and aluminum.

It is crucial to wash and oil UPVC windows and doors regularly. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, which can make it extremely dangerous and possibly fatal. It is essential to take the time to make sure that you are doing everything you can to keep your windows in good repair.

Single-pane windows are relatively simple to replace, and they generally fit into frames of the past easily. If you have double-paned windows which are held together by internal beading, it is difficult to remove and replace the panes that were previously in use. In this case, you will need to locate some plastic spacers that will aid the new pane in being able to fit properly into the window frame.

If you plan attempt to remove the window panes yourself it is crucial to wear the proper safety gear such as gloves that are thick and eye protection. It is also a good idea to lay down a dropcloth before you start working on the glass to ensure that any fragments of glass fall onto the fabric instead of landing on the floor, where they could be trampled upon and cause further damage.

Once the glass has been removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to block water and drafts from getting into the property until a professional can come out and repair the window. It also acts as a barrier to prevent any intruders from getting into your home. If the distance between the window and the door is large, you might need to consider an alarm system that includes a window. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber sash windows. However, over time they can suffer from a variety of problems including sagging. A sagging uPVC window could cause issues with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to prevent the problem from worsening.

Repositioning the hinges can help fix a window that is sliding. First, you'll need to open the windows to get at the frame. Then, using a screwdriver, you can take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and test it for fit. If you are happy with the size of the window, tighten the screws to hold them in the right position.

If you cannot reposition the hinges, you could have to replace the seal. Rubber seals can dry out and lose their elasticity with time, leading them to lose their tightness. If this happens, it's essential to replace the seal as fast as you can to ensure that your upvc window repairs windows are waterproof and secure from draughts.

UPVC handles can also loosen. This is usually due to screws that have become undone over time, but it can also be due to the handle mechanism wearing out. It's relatively simple to fix a loose uPVC hand. The first step is to close the window and perform a test to ensure that it fits. The joint at the corners of the sash should align with the joint on the casing. If it does not you can use a screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

It is crucial to take action if wake up every morning to find mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

It is a fairly easy fix and should be undertaken by any skilled DIYer. Depending on how severe the issue is, old caulking may need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, do not be tempted to apply too much caulk in order to make the area harder to clean and reduce the efficiency of your energy.

Make sure that the drainage holes do not have debris inside them and that the sill pan is properly angled to drain away from the window. In more serious situations, you might have to consider replacing the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to note that if the leakage originates from the glass in your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and open with a breeze it could be hinges that are at the fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Like any mechanical component hinges are prone to wear out over time. It is essentially a very simple process, but it's easier to do if you have someone to help you hold the frame in place.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. Check for the arrows on each hinge to determine which direction the window should be opened.

The issue could be caused by opening the window improperly or due to a poor installation in the factory. This issue can be fixed by sending us a picture on our website. We will be more than happy to give you suggestions.

Regularly lubricating the hinges is essential. Applying an engineering lubricant that is light to the hinges is a good way to do this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. It is recommended to perform this every year. WD40 and other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by different factors. The hinges, also because of wear and tear, could become misaligned. This can cause an opening to appear between the sash and the frame. If they're beyond repair, it may be required to realign them. The interlock, which is located on the hinge of the window, can also be misaligned, and again it is possible to just give them a thorough clean, however in some instances it could be necessary to get them replaced.

These seals can wear down or be damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass, this will help in regulating indoor temperatures, and also reduce draughts.

The last way to reduce draughts effectively is by using a Draught-excluder. These are usually fabric tubes filled with a filler, which can be put on top of your window sill. These will help to keep cold air out and keep your home warm and cosy!

Your upvc windows can keep providing excellent insulation and security to your home by performing regular maintenance and repairs. It is crucial to keep in mind that all windows eventually wear out and it may be cheaper to replace them than to repair them. If you are experiencing issues with your Upvc window you should consult a professional immediately.