• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

It can be difficult to set up a cat flap, but with the right guidelines, it's not all that difficult. First, determine the height you want the cat flap to be (on average the belly height). Note this on the door, and use the template as a guide to drill.

If you have a kitten, or a young kitten, prop the door open very slightly and gradually encourage it to go through. Reward the kitten as it goes through.

Measure the Door

A cat flap lets your pet to go in and out of your home at its convenience. This can help with keeping your cat healthy by making sure that it is exercising as well as being able to go back inside if left outside in bad weather, especially in winter. It can also reduce the amount of time you have to let it out or in and can also keep your home safe by letting you be aware of when it went out.

It is important to make sure that the cat flap is installed correctly in order to prevent your pet from being pushed through it or escaping by other animals (e.g. dogs). It is important to measure your pet's belly height and the doorway to your home to make sure that the flap is at the right height. If your cat is taller or shorter than normal, you can adjust the flap's position by moving it up or down a small amount.

The next step is to use a spirit level to mark the center of the door. This is where you'll install the flap. Then, using the markings as an indication, cut out the contour of your flap on the door with the aid of a Jigsaw. Once you have cut out the door, sand the edges of the door to create smooth surfaces. You can then drill any fixing holes required.

The process of fitting a cat flap isn't as difficult as you believe and it shouldn't take more than two hours to finish the entire task from start to the end. The process can be slightly more difficult if you have to install it in the form of a uPVC door or composite one. This is because these doors are available in different thicknesses, which could affect the way the holes are cut. This is the reason we recommend hiring a professional to carry out the job, particularly if you have never worked with glass before.

Measure Your Cat

You can avoid hours of ignoring the pet's meow to be let in or out. This is especially useful when your cat is inside in all weathers while you are at work.

If you're planning to put a cat flap inside your door, it is crucial that you take measurements of your cat flap installation cost prior to attempting the task. Although it might seem like to be a simple task, it is crucial to get the measurement right or your cat will find it difficult to use.

First, make sure your cat is calm prior to taking measurements. You'll need to keep them in a manner that they cannot move and make sure that the ruler or measuring tape is flat against their body and not bending in any way. Keeping the ruler or measuring tape against their body from the top of their head to the bottom of their tail can allow you to get an exact measurement.

Once you have your cat's measurement and measurements, you need to examine the door to determine where to place the flap. Position the flap at the level of your cat's belly. This will allow them to walk through the door with minimal effort. This will also stop the flap making a lot of noise as it swings open and closed.

You should take into consideration the thickness of the uPVC or composite door too. While all timber doors have a similar thickness, uPVC or composite doors can differ greatly in their overall design. This can make the process of putting in a flap for your cat more difficult as you need to ensure the hole is the right size.

You can also use the template drawing included in the instructions to mark the location of the hole in the door. This will allow you to determine where the opening must be and make sure that the template is correctly positioned on the door. It is also beneficial to employ a spirit-level to ensure that the template sits in a straight line against the door.

Cut the Flap

You will need to cut a hole in the door panel for your cat flap installers flap prior to you can install it. This can be a challenging job, and it is recommended that you get help from a professional cat flap fitting service to complete this task if you don't have the expertise or knowledge to complete the task yourself. You can also read the instructions provided with the kit to learn how to do it right.

To do this, you will need to measure the height of your cat or kitten's belly and use this as an indicator point. As a rule of thumb, place the cat flap around 10-15 centimeters higher than the ground. This is the average height of the stomach for cats. This will allow your cat to pass through the flap with ease and make it more difficult for other cats and nosy neighbours to enter or exit.

Once you've decided the best location for the cat flap to be placed, mark this location on the door using the help of a pencil. If your kit has the template put it on top of the door. Use the markings on the template to drill holes at every corner. Then, you should be able to cut out the shape of the template and replace it with your cat flap bifold doors flap.

If you are installing your cat flap on an entryway made of wood or uPVC, it is possible to do this yourself if you feel confident enough to handle using a jigsaw. Make sure you don't cut into any of the door's mullions, or vertical rails. You can use a jigsaw to cut the panel into a circle or square, depending on the design of your cat flap. Take your time and don't try to force the jigsaw into cutting faster.

Once the hole has been cut, carefully place the cat flap into its new place of residence. Make sure it is firmly secured. If it features screw caps, then push these onto the protruding screws. Once the screws are in place, sand any rough edges of the cut, and then seal any gaps to ensure that there aren't any draughts entering into your home.

Fit the Flap

If you have a standard cat flap, you can help your pet to go through it by placing a small amount of cat food on the outside of the door. Alternately, you can push the cat through using your hand or a stick. Once your cat has become accustomed to walking through the flap it will be able to come and go at will. This lets you let it in and out at any time it wishes.

It is possible to fit the flap inside the UPVC doors or glass door, however it might not be as easy as installing one in a wooden external door. This is due to the fact that the doors made of UPVC and some kinds of glass doors don't have a uniform thickness. This could have a significant impact on how you cut the hole for the flap and can also affect whether your flap will fit properly once it's been put in place.

The mounting kit could contain a template that outlines the best places to drill holes. If the kit does not come with a template, you can make one on your own. It's important to not press the jigsaw too hard when cutting, so it doesn't make a larger than necessary hole in your door.

Most cat flaps are square or rectangular in shape, however there are some that are circular, and they are typically more difficult to place. If you have a circular flap, make sure the hole is located in the correct place on the door. Otherwise, the cat may not be able to use it, and might be stuck outside the whole day (or at night).

Certain cat flaps have locks that allow you to regulate when your cat is allowed to enter and leave. These can be very useful in the event that you are worried about your pet going out at night only to come back door with cat flap fitted in because of the darkness, or you're working all day. Certain locks can be used for access or exit, and others can be locked both ways. This is beneficial for sick or older cats who aren't keen to go outside in bad weather.