• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Fitting a cat flap can be a bit daunting, but it is fairly simple with the right instructions. Firstly, determine how high you want the flap to be (on average or belly height). Mark this point on the door, and use the template provided as a guide to drill.

If you have a kitten who is still a newborn then gently prop the door slightly open and invite it to walk through. Reward the kitten each time it moves through.

Measure the Door

A cat flap is an excellent way to let your pet move inside and out of your home as it pleases. This can help keep your cat healthy as it will ensure that it is exercising regularly and also be able to return inside if it gets trapped outside during bad weather. It can also cut down on the amount of time you'll have to spend letting it out or in and can also keep your home safe by letting you know when it's been out.

However, it is important that the flap on your cat is properly fitted to stop your pet from escaping through it or be pushed through by other animals (e.g. dogs). It is crucial to determine the height of your pet's belly and the doorway to your home in order to make sure that the flap is at the right height. If your cat is taller or shorter than normal, you can adjust the flap's height by moving it up or down a small amount.

The next step is to utilize a spirit level mark the center of the door that you will be installing the flap. Then, using the mark as an indication, cut out the shape of your flap with a Jigsaw. After cutting the flap, sand down the edges to create smooth surfaces. Drill any holes you need to.

Installing a cat flap ought to not take longer than two hours. However, the process can be slightly more complicated when you have to install it inside a uPVC or composite door because these doors have various thicknesses, which affect how the holes are cut and what they are fixed into. This is why we always recommend calling a professional to carry out the job, particularly if you have never worked with glass before.

Measure Your Cat

You can avoid hours of listening to the pet meow to be let in or out. This is particularly useful when you're at work all day and your cat has to stay inside waiting until you get home regardless of the weather.

If you are planning to install a cat flap on your door, it is essential that you measure your cat before attempting the task. It may appear to be a simple task, but it is essential to make sure you measure the right measurements. In the event that you don't, your cat may have difficulty putting it in use.

Firstly, make sure your cat is relaxed and not anxious prior to taking the measurements. You will have to hold your cat in a position that they are unable to move. Also, ensure that the measuring tape is flat and not curved against their body. You can get a precise measurement by keeping the measuring tape or ruler flat against the body of the animal from the top to the bottom.

Once you have your cat's measurement then you can look at the door to decide the best place to place the flap. Place the flap at the level of your cat flap installation's belly. This will allow them to pass through the door with minimal effort. This will also avoid the flap from making a lot of noise as it swings open and closed.

You will need to take into consideration the thickness of the uPVC or composite door, as well. Although timber doors are of a similar thickness, uPVC and composite doors may differ in their overall construction and this can make the installation of a cat flap more difficult since you have to make sure that the hole you cut is the right size for your pet.

It is also worthwhile reading through the directions that come with the kit to locate an outline of the template that can be used to determine the position of the hole in the door. This will allow you determine the location where the opening should be, and also to ensure that the template is properly placed on the door. Utilizing a spirit level to check that the template is in a straight line against the door can be extremely helpful.

Cut the Flap

Before you can put in your cat flap, you'll need to cut the door panel in order to create a space large enough for it. This is a difficult job, and it is recommended to seek the help of a professional cat flap cover for winter flap fitting service for this step should you not have the knowledge or skills to tackle it yourself. You can also refer to the instructions that come in the kit to find out how to do it correctly.

To do this, you have to take a measurement of the height of your cat's or kitten's belly. Use this as a reference point. As a rule of thumb, place the cat flap about 10-15 centimeters above the ground. This is the typical height of the belly for cats. This way, your cat will be able to move through the flap comfortably and it will also give any other cats or curious neighbours difficult time trying to get in or out.

The position of the cat flap on the door with the pencil. If your kit comes with the template put it on top of the door. Use the markings on the template to drill holes at each corner. Then, you'll be able to cut out the template and replace it with the flap for cats.

If you are installing your cat flap inside an entryway made of wood or uPVC, it is possible to do it yourself if you are comfortable with using a jigsaw. Be careful not to cut into the vertical rails or mullions of your door. You can use a jigsaw to cut your panel into a square or a circle, depending on how you'd like it. Remember to take your time and don't try to force the jigsaw into cutting faster.

After the hole has been cut and the flap is firmly positioned, carefully place the cat flap into its new home and ensure that it is securely secured. If the flap has screw caps then push them into the protruding bolts. Once the screws have been installed, sand the rough edges and apply sealant to any gaps. This will stop draughts from entering your home.

Install the Flap

If you have a standard cat flap, you can help your pet to use it by placing a small amount of cat food on the front of the door. Alternatively you can try pushing the cat through with your hands or with a stick. Once your cat is accustomed to walking through the flap, it is likely to be able into and out as it wants so you can let it in or out without having to be there keeping the door open to allow it in all day (and potentially in any weather).

You can fit an animal flap inside a UPVC or glass door although this may not be quite as straightforward as fitting one into a timber exterior door due to the fact that the UPVC doors and some glass doors don't have a consistent thickness. This can have a dramatic effect on how you cut the opening for the flap and will also affect whether the flap fits correctly once it's been put in place.

Depending on the model of cat flap you choose It may be equipped with a mounting kit and a template that will tell exactly where to drill the holes for it. If the kit doesn't include a template, you can photocopy it to make your own. When cutting, it's crucial to not push the jigsaw hard so that you don't create a bigger hole than necessary in your door.

Some cat flaps come in circular shapes, which are more difficult to put in. If you have a round flap, make sure the hole is located in the correct spot on the door. Otherwise, the cat may not be able to access it, and might be outside all day (or at night).

Some cat flaps have locks which let you manage the time your cat flap installer near me comes and goes. These can be very useful when you're worried about your cat going out at night only to come back in the darkness, or you're at work all day. The lock can be used for entry or exit and some are locked in both directions, allowing you to shut the door completely, which is especially helpful for cats with a chronic illness or older age who aren't keen on going out in the rain.