• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

It is possible that you need the key fob to be programmed by an automotive locksmith or subaru replacement key fob dealer, depending on how old your subaru key fobs is. This is done by connecting a computer programming machine to your vehicle.

To program your subaru legacy replacement key cost to program, open the driver's side door using the door button and then close it. You will hear the chime, and see the dome lights blink in the instrument panel.

Step 1: Find the circuit board for your transmitter

There are many ways to program your key fob. The first step is to be aware of what kind of key fob you have. You can determine this by studying the key fob's shape or by listening to your car's sound.

Once you have these details, you are able to begin the process of programming your key fob from home. To accomplish this, you'll require a key made of steel and a screwdriver that has a flathead. You can open the key fob by twisting. Then push the key made of metal into the case and then release the battery from the small tabs that hold it in place. Replace the battery with a fresh one and then put the key fob case back together.

Step 2: Unscrew the Key Fob Case

Change the battery is a good idea since it can revive key fobs that have stopped working any more. In some cases the buttons on the key fob may be broken. If you see that the contacts made of metal on the button have become loose try soldering them back in place again in order to make them function once more.

Make sure that you shut off your ignition and close your doors before you begin. You can accomplish this by closing the driver's door and pressing your door button ten times in rapid intervals. Then you'll hear the instrument panel chime, and the dome light will flash. This means that you are ready to move on.

Step 3. Insert the fob of the key into the ignition

A lot of articles on the internet will explain how to program your brand new or replacement subaru key copy keyfob at home. However, the majority of them do not provide precise instructions. Reprogramming an electronic lock is best handled by an experienced auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat with the doors shut and the engine turned off. Use the door button to open all of the doors. Close and open the driver's door two times more. Then, insert and remove the key from the ignition switch (don't turn it) 10 times within 40 seconds. The system should sound chirps to confirm that the settings have been altered.

Step 4 Step 4: Switch on the ignition

Before you begin this process of key fob programming, it is crucial to know that this method works only when you have a working key already. If you don't then a dealer or auto-locksmith will be required to program keys for your Subaru Fort Bliss.

After your key has been programmed and you are able to start your car within five minutes. To begin, ensure that all doors are closed and the engine is turned off. Assume a seat in the driver's chair and unlock all the doors by pressing the button for the door. Put the key into the ignition and then turn it to the first position. The electrical systems will be activated however the engine will remain in neutral. Repeat this process ten times.

Step 5 Step 5: Unlock Driver's Door

Subaru provides a variety of high-end cars with key fobs that can lock and unlock the doors as well as start the car and defrost the windows. However, sometimes, these devices do not function properly.

To resolve the issue then you should contact a locksmith or a dealer. This will solve the issue and ensure that your vehicle is secure.

You must first open and close the driver's side door. Put the key in the ignition and turn it to position 1. Then, it should be returned to the off position. Perform this as fast as you can for ten times. After the tenth repetition you should hear a sound.

Step 6 Step 6: Press the Lock/Unlock Button on the Driver's Door

If you are looking to replace the battery in a lost subaru keys key fob, the process is straightforward. First, open the exterior fob casing. Use a flathead to pry the inside of the case and take out the old batteries.

After taking the battery out and replacing it with the new one. Close the case. Assume a seat in the driver's chair and open all doors using the door-button control. Put the key in the ignition and turn the key to ensure that the electrical system is on, however the engine is off. Repeat this 10 times until you hear a chime on the instrument panel. This puts the system in programming mode.

Step 7: Press on the Passenger Door Lock/Unlock button

The annoying chirp which can be heard when you lock or unlock the Subaru Key Fob from the outside of the vehicle can be a distraction for some owners. In some instances the chirp can be disabled by closing and opening all doors, and then a double-click of the lock button on the key fob.

Switch off the ignition and shut all doors as well as the fuel-filler lid. For 10 seconds, press and hold the lock button on the key fob. The instrument panel emits a sound when this is accomplished. The chime indicates that the door and fuel-filler lid are locked. It is possible to change the setting to make the doors lock automatically and without having to push a switch.

Step 8 Step 8: Enter the 8-digit Transmitter Number.

Note down the first series of 8-digits, and keep it in a safe place. Now, sit in your driver's seat. Close all of the doors, and then turn the key back to the first position (towards on). After ten turns your instrument panel will sound at least once.

The circuit board that controls the transmitter is inside the key fob case. The circuit board should contain one or two numbers with 8 digits. Follow the directions in the guide to register the code. For older models, this process may require a visit the dealer.